Shop our Airplanes Products Drone Products Sales
Thread Tools
Jul 31, 2006, 01:18 PM
Aerofever.net
Albert_Moto's Avatar
New Product

Aero-fever - "FunboatJet II"


The new "FunboatJet II" will be available very soon !!

Retail Price: US$45

(Wholesale enquries are welcome)

Stay Tune on www.aero-fever.com

Albert
Last edited by Albert_Moto; Jul 31, 2006 at 10:13 PM.
Sign up now
to remove ads between posts
Aug 30, 2006, 04:01 AM
Aerofever.net
Albert_Moto's Avatar
Arrival!! Ready for sell now~~

Albert
www.aero-fever.com
Sep 17, 2006, 03:11 PM
Aerofever.net
Albert_Moto's Avatar
Here is the C.G. reference of our FunboatJet II.

& Short Flying Video --> Download <--

Albert
www.aero-fever.com
Sep 19, 2006, 12:24 PM
Stupid gravity!
docphi's Avatar
What is the AUW? What motor is recommended?
Sep 20, 2006, 11:40 AM
Aerofever.net
Albert_Moto's Avatar
We recommended to use Zeta-Plus 2100kv + GWS 7060 prop. , with Zeta-plus 11.1V 1000mah or 1300mah (20-25C) li-po

The AUW is 380-430 gram...

Albert
Sep 21, 2006, 12:28 PM
Stupid gravity!
docphi's Avatar
Albert,

Can the manufacturer extend the center pontoon to the leading edge of the prop clearance hole? The deck twists and breaks very easily. I would also make the prop clearance hole more narrow to increase the structural support for the deck. All you need is a small slot in the deck to clear the prop.

I like the video. Looks like the cg was way off.
Last edited by docphi; Sep 21, 2006 at 12:33 PM.
Sep 21, 2006, 01:22 PM
Aerofever.net
Albert_Moto's Avatar
Quote:
Originally Posted by docphi
Albert,

Can the manufacturer extend the center pontoon to the leading edge of the prop clearance hole? The deck twists and breaks very easily. I would also make the prop clearance hole more narrow to increase the structural support for the deck. All you need is a small slot in the deck to clear the prop.

I like the video. Looks like the cg was way off.
Hi docphi,

Thanks for your advise. Can u send me some photos to show it ?

Best wishes,

Albert
Sep 25, 2006, 08:19 AM
Stupid gravity!
docphi's Avatar
Albert,

Here is what I would do. Make the prop hole more narrow and extend the center pontoon. I would also hollow out the center pontoon to save weight. The deck twists a lot. It needs to be reinforced.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review Aero Fever BAE Hawk netmechanic Electric Ducted Fan Jet Talk 49 Aug 25, 2009 07:28 AM
Build Log Aero-fever BAE Hawk build power Pusher Prop Jet Models 68 Jun 16, 2007 03:51 AM
Discussion Aero Fever SU-27 Cpt.Krunch Pusher Prop Jet Models 28 Jun 05, 2006 10:34 AM
Discussion aero-fever battery packs Babo Batteries and Chargers 0 Jan 25, 2006 03:39 PM
Aero-fever.com - Grand Opening ! Albert_Moto Vendor Talk 2 Nov 10, 2005 12:29 PM