New Products Flash Sale
Thread Tools
Old Jul 29, 2006, 12:27 PM
tallflyer is offline
Find More Posts by tallflyer
Registered User
tallflyer's Avatar
Cool

GWS DHC-2 Beaver with onboard video


I just made this cool little video of my GWS dhc-2 Beaver with a onbaoard video camera

Setup is a bp21 motor with (and now I know why they are so cheap the towerpro brushless esc) piece of junk..

Im going to replace it with one of my New Dualskys

prop 9070

battery dualsky 1050 11.1 volt 3 cell (this battery makes the plane a rocket as you can see from the take off)

Im going to switch the bp21 to a bp12 same setup I have in my slowstick.

anyways great fun...

http://www.youtube.com/watch?v=egsLU2HeIHY

Check out the dead stick landing at the end. the esc was not smoth enough for me to throttle down gentle!

(you get what you pay for).
RCG Plus Member
Latest blog entry: Yunnec Typhoon H Review
Sign up now
to remove ads between posts
Old Jul 29, 2006, 08:26 PM
Ranfred Radius is offline
Find More Posts by Ranfred Radius
Registered User
Ranfred Radius's Avatar
Cool vid tallflyer! Is the cam a 5in1? Here's a clip using that camera on my E-Starter...

Randy

http://video.google.com/videoplay?do...82475646188812
Old Jul 29, 2006, 09:19 PM
tallflyer is offline
Find More Posts by tallflyer
Registered User
tallflyer's Avatar
rocketman

It was because of you I got interested in teh 5in1 and found one! these are so much fun!

It is small enough to put on any plane! and the video is good!
RCG Plus Member
Latest blog entry: Yunnec Typhoon H Review
Old Jul 29, 2006, 10:23 PM
GWS CHEN is offline
Find More Posts by GWS CHEN
Registered User
Very good video, almost the same as what I've seen on a flight simulator. Any information of this on board camera?
Old Jul 29, 2006, 11:06 PM
Skrogg is offline
Find More Posts by Skrogg
Balsa is for doll houses
Skrogg's Avatar
Nice Rocketman!

Tallflyer whats the frame rate on the cam you guys are using?
Heres one I did in december.
www.skrogg.com/st1.wmv
Its a 400line wireless plugged into my cam on the ground. Not to bad even if the reciver was in the garage
Old Jul 30, 2006, 05:42 AM
tallflyer is offline
Find More Posts by tallflyer
Registered User
tallflyer's Avatar
Here is another view of my video! no music on this one so you can hear the esc shut off, and that the throttle curve on this cheap esc is pretty poor!

http://www.youtube.com/watch?v=0JVgYqGKSfU

on the landing I had to dead stick as I tried to cut the throttle but the motor just shut off.
RCG Plus Member
Latest blog entry: Yunnec Typhoon H Review
Old Aug 02, 2006, 06:18 PM
tallflyer is offline
Find More Posts by tallflyer
Registered User
tallflyer's Avatar
Quote:
Originally Posted by rocketman47
Cool vid tallflyer! Is the cam a 5in1? Here's a clip using that camera on my E-Starter...

Randy

http://video.google.com/videoplay?do...82475646188812

do you have a picture thats shows your setup!

I shot some video and it was all shaky! just trying to get a little better informed!
RCG Plus Member
Latest blog entry: Yunnec Typhoon H Review
Old Aug 02, 2006, 09:19 PM
Ranfred Radius is offline
Find More Posts by Ranfred Radius
Registered User
Ranfred Radius's Avatar
Quote:
Originally Posted by tallflyer
do you have a picture thats shows your setup!

I shot some video and it was all shaky! just trying to get a little better informed!
Here's a pic of how I have been mounting the cam. I just cut a hole in the top of the wing and shoved it in!

Recently, I have been "velcroing" the camera to the side of the fuse(under the wing, on the CG) I use Scotch brand "Dual Lock" Holds the cam firm. More so than the "male/female" fuzzy velcro brand.

Randy
Old Aug 03, 2006, 04:20 AM
downunder bird is offline
Find More Posts by downunder bird
stride the skies
downunder bird's Avatar
cool video tallflyer, i wondered how well it would work and now i know ,,rocketman,, out of this world,,, you blow me away man,,lol when i first watched yr videos i was gob smacked,,taking of in ya driveway and landing in the street ,,,way cool mate ,,,id love to be able to do that ,,,cept my street way to busy ,id have a 20 sec envelope to land in ,,,between light changes,,lol,, well done and keep posting them they are awesome to watch ,,
Old Aug 03, 2006, 08:07 PM
seebass is offline
Find More Posts by seebass
Registered User
ok seriously now , where the hell do i get that camerea that is awesome footage rocket man and the quality is great. how much does that thing weigh and is it on a memory card or internall software.
Old Aug 03, 2006, 08:24 PM
tallflyer is offline
Find More Posts by tallflyer
Registered User
tallflyer's Avatar
Here is another video I shot!

I need to do a better job of mounting the camera the shake made the video a little fuzzy!

Still alot of fun!

You can see where they are using the sprinklers at the local field!

http://www.youtube.com/watch?v=tDoGz08Z9bE
RCG Plus Member
Latest blog entry: Yunnec Typhoon H Review
Old Aug 04, 2006, 12:04 AM
Ranfred Radius is offline
Find More Posts by Ranfred Radius
Registered User
Ranfred Radius's Avatar
Quote:
Originally Posted by seebass
ok seriously now , where the hell do i get that camerea that is awesome footage rocket man and the quality is great. how much does that thing weigh and is it on a memory card or internall software.
The 5in1 weighs .7 oz. No external memory card. You can get one here

http://gorillabobsshack.com/

Randy


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log GWS DHC-2 Beaver Build tallflyer GWS (Grand Wing Servo) 13 Jul 14, 2006 11:42 AM
Found Cowl for GWS DHC-2 Beaver RyanF Aircraft - General - Miscellaneous (FS/W) 0 Jun 03, 2006 12:21 AM
Question GWS DHC-2 Beaver for indoor? FlattyFlier GWS (Grand Wing Servo) 16 Dec 29, 2005 09:59 PM
GWS DHC-2 Beaver Horizon Vendor Talk 1 Jul 02, 2002 06:18 PM
GWS DHC-2 Beaver Horizon Vendor Talk 0 Apr 08, 2002 03:44 PM