MaxAmps 2100(2200)HV, CBA+10X amp. graph - RC Groups
Thread Tools
Jul 28, 2006, 11:57 PM
Registered User
Data

MaxAmps 2100(2200)HV, CBA+10X amp. graph


This cell is rated 30 amps maximum contiuous discharge, 10-second 40 amp max. bursts.

Actual voltages may be slightly higher than shown:
https://www.rcgroups.com/forums/show...1&postcount=12

- RD
Sign up now
to remove ads between posts
Jul 29, 2006, 05:31 PM
Registered User
***
Jul 30, 2006, 09:13 PM
Thanks for the testing RD! You are the best!

-Austin
Jul 30, 2006, 09:17 PM
Registered User
You're welcome, Austin.

- RD
Jul 31, 2006, 03:51 PM
Can you make sure this gets added to your section within the Battery Graph Vault. We are very excited about this cell and are going to run a special on it in the next few days for those that are interested.

-Austin
Jul 31, 2006, 04:56 PM
Registered User
Done.
Aug 01, 2006, 03:00 PM
Team 3DHS
BoneDoc's Avatar
That looks good. How much does a 3S pack weigh?
Aug 01, 2006, 04:33 PM
myk
myk
Registered User
myk's Avatar
152g from their webpage. I was trying to compare this pack to an Apex pack, but I can't find the apex discharge curves anywhere in the vault, this one from Maxamps costs more and you have to pay a little extra to get a TP or Hyperion style balance connector.

Mike
Aug 01, 2006, 04:36 PM
Registered User
Ken Myers's Avatar
According to MaxAmps 152g or 5.36 oz.
Aug 01, 2006, 06:31 PM
Mike,

Hang in there for a day or so. We are putting the 3S 2100HV on sale for $47.99

I think that is less than the apex price.

-Austin
Aug 01, 2006, 06:53 PM
myk
myk
Registered User
myk's Avatar
Quote:
Originally Posted by austinelse
Mike,

Hang in there for a day or so. We are putting the 3S 2100HV on sale for $47.99

I think that is less than the apex price.

-Austin
Same price, apex pack is $47.95 for one, less for more quantity. I was mainly interested in how they perform relative to one another.

Mike
Aug 01, 2006, 11:02 PM
Mike,

I dont know how the Apex will perform. I have never seen a graph for one. I did notice that the weight is higher than our 2100HV packs. The 2100 will also put out over 2200mah as you can see from the graph. I don't know of another cell that will match it in performance or value.

-Austin
Aug 02, 2006, 06:48 AM
Soaring Circuits
rcbrust's Avatar
Austin,

I have a 2S 2100 ProLite pack that I'd really like to increase to a 3S pack. TP won't sell individual cells, but I noticed that you do. Do you see a problem with adding one of your cells in series with a TP pack?

Thanks,
Randy
Aug 02, 2006, 10:47 AM
Randy,

I would not add it to the Thunder Power pack. The TP cells and the MaxAmps cells will perform differently and the capacity will not be the same. You would end up having to balance the pack on every cycle.

-Austin
Aug 02, 2006, 11:02 AM
Soaring Circuits
rcbrust's Avatar
Austin,

Thanks for the reply. I understand what you are saying and am planning to charge the packs separately anyway. They will be put in series via connectors, not soldered. I also rarely use more than half the capacity before recharge. I am basically looking to see if the cells are similar enough to be used this way.

Thanks,
Randy


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Data GraysonPower 2100 15C, CBA+10X Amp. Graph RD Blakeslee Batteries and Chargers 11 Sep 05, 2006 10:41 AM
Discussion Apex 2100 15C, CBA/10X Amp. Graph RD Blakeslee Batteries and Chargers 12 Jul 27, 2006 12:01 AM
Discussion MaxAmps 2100 (2200) Prototype, CBA Graph RD Blakeslee Batteries and Chargers 12 Jul 03, 2006 04:29 AM
Discussion Enerland 2100 20C CBA/10X Amp Graph RD Blakeslee Batteries and Chargers 0 Jun 19, 2006 11:29 PM
Discussion DN Power 2100 20C, CBA/10X Amp Graph RD Blakeslee Batteries and Chargers 0 Jun 18, 2006 09:35 PM