New Products Flash Sale
Thread Tools
Old Jun 18, 2009, 11:50 PM
evan.flatt is offline
Find More Posts by evan.flatt
evan.flatt
evan.flatt's Avatar
just finished the me-109. the result is it's to heavy, it flies about 3-6 feet above the ground, if i had one i would put a small 3 cell on it. looks like i'll put the electronics on a roun-tuit.
Sign up now
to remove ads between posts
Old Jun 19, 2009, 08:54 AM
kdahlhaus is offline
Find More Posts by kdahlhaus
Registered User
kdahlhaus's Avatar
Sorry to hear that. I've only used 3-cells on mine. What prop are you running?
Old Jun 19, 2009, 11:24 AM
evan.flatt is offline
Find More Posts by evan.flatt
evan.flatt
evan.flatt's Avatar
apc 8x3.8, but i already have built a roun-tuit type with a dihedral on the wing tips so i didn't have to change batteries
Old Jun 19, 2009, 11:32 AM
kdahlhaus is offline
Find More Posts by kdahlhaus
Registered User
kdahlhaus's Avatar
Ok. I think a higher pitch would help.
K
Old Jul 22, 2009, 08:37 PM
supraman359 is offline
Find More Posts by supraman359
Qualicum Beach B.C. Canada
Anybody try this

Old Jul 23, 2009, 09:11 AM
kdahlhaus is offline
Find More Posts by kdahlhaus
Registered User
kdahlhaus's Avatar
I thought about once after seeing a RTF version for sale. Looks very cool (can you post a higher resolution picture?). How does it fly?
Old Jul 23, 2009, 05:06 PM
supraman359 is offline
Find More Posts by supraman359
Qualicum Beach B.C. Canada

Larger Me 109 Z (Zwiling or Twin) Photos








this is the 3 view I used, notice I added the outer tail sections



Sorry I dont have the greatest camera, it flys great, little pitch sensitive, I've just added the tail extensions, they make it look alot better, haven't flown it with them but they should calm it down a bit.

It's powered by 2 Blue Wonders of the 1700kv variety, spinning counter rotating 7x5's, 2 18a Super Simple esc's (overkill yes all I had ), the red lead of one esc is removed and a Y connector to the rx, 4 5gr servos, (2 for ailerons on a Y connector, one for elevator and one for flaps), a Corona 6ch synth rx and 2x 1000mah Zippy Flightmax 2s 20c, one on each esc.

AWG is 16oz, I could save some weight by using 10a esc's and smaller batts.
Old Jul 24, 2009, 05:04 AM
kdahlhaus is offline
Find More Posts by kdahlhaus
Registered User
kdahlhaus's Avatar
It looks great. Thanks for posting the flight info and detailed pics.
K
Old Nov 28, 2010, 10:09 AM
Ruduz is offline
Find More Posts by Ruduz
Registered User
Hi! This is a really grate 109. Im just wondering if its possible to just use AIL and ELE on this plane? Or do I have to put the RUDDER on as well...?
Old Jun 23, 2011, 04:31 PM
kdahlhaus is offline
Find More Posts by kdahlhaus
Registered User
kdahlhaus's Avatar
Just saw your post, sorry for the delay. It works fine with aileron and elevator, no rudder needed.
Old Jul 23, 2013, 10:39 PM
kdahlhaus is offline
Find More Posts by kdahlhaus
Registered User
kdahlhaus's Avatar

Blu-109 Pilot / Cockpit


I was asked for a copy of the pilot / cockpit image. So here it is.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Modeltech 25 size ME 109 Conversion Joe Elston Electric Plane Talk 10 Oct 24, 2007 07:20 PM
Video Blu-109 FFF kdahlhaus Electric Plane Talk 0 Jul 02, 2007 08:12 PM
Modeltech ME 109 Electric Conversion Which Prop? Joe Elston Electric Plane Talk 6 Jul 09, 2002 08:34 PM
ME 109 Joe Elston Electric Plane Talk 0 Jul 10, 2001 01:41 AM
Any sites with photos of the ME 109? slowflyer Scale Kit/Scratch Built 6 May 24, 2001 08:17 PM