500 g/17.5 oz. dc head pusher - the Minimum - Page 26 - RC Groups
Thread Tools
Sep 26, 2016, 08:13 PM
Registered User
britinoz's Avatar
Nice to see a new Minimum in the air.....so simple and so stable.
Chris...
Sign up now
to remove ads between posts
Sep 27, 2016, 04:47 PM
It's all in the Blades!
SafeLandings's Avatar
Nice one Joe
Oct 29, 2016, 03:51 PM
Antonio
AntonioF104's Avatar
Before judging, it would be enough to know the people. Sorry to answer only now, I do not follow forums for years. The first autogyro was built thanks to the plans and recommendations of the dear Hans, with whom he also felt there privately and I publicly thanked both in the old version of the site, both in the present and you can read it yourself. From that experience, I decided to give my customization in the project, redesigning the structure, but sembre based upon the experience gained with the Hans autogyro, I have never made any secret, I just made my own version. There is nothing unusual and no malice ordesire to take merits, I've only made a custom version, if one looks, without prejudice and without controversy easy enough to see, not only the structure is different, as made of aluminum , with different slightly size, but also the tail planes different, the design of the pilot and also, in order not to make the mystery of nula, to accelerate the building time, decided to use a rotor head already prefabricated. I do not see what the problem is, but it is clear, I have known, albeit virtually Hans and I am forever grateful to the teachings and the advice that he gave me years ago. I'm sorry you try always to think badly enough ... stop, reflect, ask and then judge.
Best Regards

Antonio Di Giacomo

link my version Aurogyro http://antoniodigiacomo.com/modelli-...uovo-autogiro/

link my old Autogyro from Hans plans (builded my father) http://antoniodigiacomo.com/modelli-...ri-2/autogiro/

Quote:
Originally Posted by britinoz
http://youtu.be/JRhurPJwi1I
According to this gentleman......this is "HIS" new design ?????????????????..................... Makes me think that I have seen something similar before......I could be wrong??
Chris...........
Last edited by AntonioF104; Oct 29, 2016 at 05:00 PM.
Oct 29, 2016, 04:01 PM
Antonio
AntonioF104's Avatar
I add:

This is the content of the pages of my sites already in my vechcio site, many years old, thanked in his time friend Hans ... as you can see .. and also in the next version of my site, in on the page first autogyro built, thanked his friend Hans.
It hurts to think that anyone would think that I would be appropriate for one of his drawings, especially because, and I repeat, I knew Hans, albeit via email and I will always have a fond memory and gratitude.
I hope I have clarified.

old version my site..page Autogyro from Hans http://digilander.libero.it/dgavio/m...o/autogyro.htm
Nov 01, 2016, 06:01 PM
Antonio
AntonioF104's Avatar
2 Semptember 2012... please read

http://www.modellismo.me/2012/09/aut...i-e-video.html
Nov 07, 2016, 03:53 AM
Registered User
PeterO_UK's Avatar
It even sounds like mine :-) Well done :-)

PeterO
Nov 07, 2016, 04:11 PM
Antonio
AntonioF104's Avatar
it is important to read that I, in 2012 and even before, I always publicly thanked his friend Hans for his teachings ...

Antonio
Jan 29, 2017, 02:17 PM
scratchbuilder
Thomas B.'s Avatar
My friends Bruno and Thomas made two Minimum with Eco 8 blades. Thos is the first succesful flight.
Minimum v6 Tragschrauber.. er flütt (0 min 58 sec)
Jan 29, 2017, 05:13 PM
Registered User
britinoz's Avatar
Two blade Minimum..............magic
Chris...
Feb 06, 2017, 04:27 AM
Registered User
PeterO_UK's Avatar
Quote:
Originally Posted by britinoz
Two blade Minimum..............magic
Chris...
The two blade Minimum has been around a long time... https://www.rcgroups.com/forums/show...9&postcount=26

I never tried o ne after Jochen said "But remember, flying the three-bladed Minimum is fun, flying the two-bladed version is hard work."
https://www.rcgroups.com/forums/show...2&postcount=37

PeterO (Working towards getting my Minimum back into the air this year :-) )
Feb 06, 2017, 06:50 AM
Registered User
106flyer's Avatar
Hi Peter,

I enjoyed your machine at my first Winterton and your friendly welcome to this art... Will we see you at some of the events this year ?

Steve
Feb 08, 2017, 05:58 PM
Registered User
britinoz's Avatar
G'Day Peter
Yes I also found the two blade version hard work compared to the three blader....but I would so like to master it.
Chris...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log 200g/7oz. dc head pusher - the Micromum JochenK Auto Gyros 216 Mar 16, 2009 12:19 PM
17.5 oz. Wing Load Dmerino Electric Ducted Fan Jet Talk 11 Dec 31, 2004 10:05 PM
The Sub-One: 24.5 g, 0.93 oz/sq ft (step 1 towards my goal) drliu Scratchbuilt Indoor and Micro Models 18 Jul 31, 2002 04:32 AM
Yippee! My wife got me a digital postal scale today. My moth is 6.5 oz w/ no battery! The Other Dave Parkflyers 1 Feb 08, 2002 10:37 PM
8.5 oz - 7.6v - 4,360Mah battery!!! asperkins Power Systems 5 Jan 03, 2002 08:27 PM