Thread Tools
Jul 14, 2006, 06:34 AM
Registered User
Discussion

Building Tiger Moth from Plans by Flt Lt Gordon Whitehead, from Nexus Plans Service,


Hi there!
I had bought a 25 size Tiger Moth plans from Nexus Plan Service (UK) the publisher of RCME. The plans were designed by Flt Lt Gordon Whitehead. I need little help with the construction. I have started to build, the plans they sent were not blueprints or CAD drawn but some photocopy of old plans and all the markings etc are not very clear.

Where I am stuck is the dihedral for the upper wings, which is next to impossible to decipher from the plans. The lower wings have a dihedral of 1 7/8". has anyone built from this plan or has the plan?? Just want to know what's the correct dihedral mentioned on the plans??

Any help would be very much appreciated
Thanks
Sign up now
to remove ads between posts
Jul 14, 2006, 09:05 AM
Registered User
Nexus has a plan number noted on each. Which are you working from?

Your plan may be very old, for Whitehead is well into electric power now.

Wm.
Jul 15, 2006, 01:25 AM
Registered User
coosybaylumber, thanks for the reply I will have to check the plan number and maybe by evening (Indian time) I would be able to tell you. Tried checking for Nexus plans service but the site seems to be down. It appears the same plan is available from RCM, as thier plan number pl-793, Cat.2 the URL is http://www.rcmmagazine.com/e/env/000...m=plans:PL-793.
Will it help in some way??
Jul 15, 2006, 04:53 AM
Registered User
vintage1's Avatar
1/. You wil get more response in the Scale forum

2/. Tiger moth's have the same dihedral top and bottom

3/. I think Gordon Whitehead is in the E-zone somewhere. He still writes for 'Flying Scale Models' as well.
Jul 15, 2006, 06:22 AM
Registered User
thanks Vintage, I am posting this now on scale forum too. and will search for gordon whitehead on electric zone too.
Jul 15, 2006, 12:51 PM
Registered User
Coosbaylumber checked the plan number on the plan. it's mentioned as 213 at bottom right hand corner of the plan. Hope that helps.
Regards
And sorry for spelling your id wrong in the previous post.
Jul 15, 2006, 04:19 PM
Single-task at best...
tim hooper's Avatar
Quote:
Originally Posted by mchandrayan
....and will search for gordon whitehead on electric zone too.
Gordon;
https://www.rcgroups.com/forums/member.php?u=1462

tim
Jul 16, 2006, 01:48 AM
Registered User
Thanx tim, but I can not sent a PM to him as it says he has choosen not to receive private messages.
Jul 17, 2006, 05:10 AM
Light and floaty does it
Work in Progress's Avatar
Actually the Tiger Moth has less dihedral on the top wing than on the bottom.
The first prototype had the same dihedral as a Gipsy Moth, equal top and bottom. But with the swept back wings, the lower wing tips were too close to the grass for comfortable operation. So they increased the dihedral on the lower wing. It's something like 2.5 degrees each side for the top wing and about twice that for the bottom wing.
Jul 17, 2006, 09:28 AM
Registered User
Thanks WIP (work in progress) actually you are right, the model has the same arrangement, 1, 7/8" on lower wings and 1" on upper. Was able to contact the designer himself and the gentleman has been a great help.
Thanx to all those who have taken the pains to help me out
regards
Jul 17, 2006, 01:37 PM
Registered User
vintage1's Avatar
Quote:
Originally Posted by Work in Progress
Actually the Tiger Moth has less dihedral on the top wing than on the bottom.
The first prototype had the same dihedral as a Gipsy Moth, equal top and bottom. But with the swept back wings, the lower wing tips were too close to the grass for comfortable operation. So they increased the dihedral on the lower wing. It's something like 2.5 degrees each side for the top wing and about twice that for the bottom wing.
I stand corrected..the three views I have don't show that well at all.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Help - Tiger Moth Plans by Flt Lt Gordon Whitehead, from Nexus Plans Service UK mchandrayan Fuel Plane Talk 2 Jul 18, 2006 01:08 AM
Depron Tiger Moth from Peter Rakes Plan hokonghing Foamies (Kits) 11 Jan 06, 2004 11:34 AM
Building Tiger Moth. How to attach foward struts w/o using screws? L.I.A. Parkflyers 10 Jun 25, 2003 09:20 AM
Building Tiger Moth Wing Tor Parkflyers 11 Aug 16, 2002 12:13 AM
Tiger Moth from Hell!!! Jim Walker Parkflyers 30 Feb 09, 2002 02:46 AM