Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 12, 2006, 12:32 PM
MattZC is online now
Find More Posts by MattZC
I just love flying
MattZC's Avatar

What is the Best Foamy of Nikitis Aircraft?

Hey everyone,
I was wondering what the best foamy of Nikitis aircraft in terms of 3D performance all around. Not just for te beginner but the Expert also. Thanks for your advice,

Last edited by MattZC; Jul 12, 2006 at 12:44 PM.
Sign up now
to remove ads between posts
Old Jul 12, 2006, 12:43 PM
prodigy is online now
Find More Posts by prodigy
Registered User
charger rc. is the way to go. they have cheap priced kits that come with almost everything you need to complete the kit.
Old Jul 12, 2006, 01:20 PM
Gibby is offline
Find More Posts by Gibby
Where's your CofG?
Gibby's Avatar
I've only flown the Mini Hot Rod. The Mini Hot Rod flies pretty good, hovers are reasonable stable, good elevator authority, good roll rate, really tight and fast blenders, and pretty good knife edge. The negatives are that it is very, very, very fragile and unless you do some good reinforcements there is a ton of tail twist. The short story is that mine only survived about 4-5 flights.

Old Jul 12, 2006, 03:11 PM
G.P. is offline
Find More Posts by G.P.
iumop ap!sdn w,I
G.P.'s Avatar
I loved my full size Hot Rod. The easiest and funest 3d plane I have owned. Even I could hover it! The downside was the landing gear. Once I doubled up the carbon it was perfect. I would also use stronger servos than the HS55's that Hobby Lobby recomends. They seemed to work fine in the air, but the weight of the controls would strip the gears during transport in my car. I eventually made some control locks from clothes pins which seemed to cure the problem. My final flight ended with no control response at the bottom of a blender. I'm not sure what happened, but I think it may have been another stripped servo. It was hard to tell from the after math!
Old Jul 12, 2006, 03:32 PM
MattZC is online now
Find More Posts by MattZC
I just love flying
MattZC's Avatar
Well I have 4 hs 55s so I was hoping to use thoes in whatever I would get.

thanks for the advoce I was considering that one.

thanks alot!

Old Jul 13, 2006, 08:49 PM
MarkCov is offline
Find More Posts by MarkCov
Registered User
I`ll second the full sized Hot Rod. One of the most all around fun easiest to 3-D planes I`ve had. You can`t go wrong.

Old Jul 13, 2006, 10:11 PM
Upside-Down is offline
Find More Posts by Upside-Down
Registered User
Upside-Down's Avatar
Charger shifty or CR-1 are both winners
Old Jul 14, 2006, 01:49 AM
Devin McGRath is offline
Find More Posts by Devin McGRath
Team Futaba
Devin McGRath's Avatar
How about the Nikitis Animal? Definitely the best 3D plane I have ever owned rolls really good and has allot of control at any attitude. I have used this plane in a few different competitions and am very pleased with it. You can check out my web site for more information and videos of me flying the Animal...

Devin McGrath

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question What is THE best free plan foamy? 3Dude 3D Flying 29 Jul 24, 2016 01:40 AM
What is the best overall flying 400 speed plane available Jaymz007 Electric Plane Talk 9 Jul 17, 2001 02:53 PM
Lite Stik-What is best way to make removable stabilizer? Ron MIller Parkflyers 4 Jul 02, 2001 02:23 PM
How many amps needed for LiteStick ESC?/ What is the best battery? spy0o7 Parkflyers 4 Jun 18, 2001 05:21 PM
For 9.6V 1600ma NIMH battary what is the best charge rate and charge time?(more) clchen Parkflyers 1 May 06, 2001 05:23 AM