Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Feb 21, 2009, 03:54 PM
smokejohnson is offline
Find More Posts by smokejohnson
3D wannabe
smokejohnson's Avatar
I haven't tried the Rhino yet but I have had decent results with the Zippy's.

I was just checking it out and my control surfaces are moving smoothly. I did let it sit upside down with the elevons folded under for a night, it helped loosen them up.
Sign up now
to remove ads between posts
Old Feb 21, 2009, 06:17 PM
GFBurke is offline
Find More Posts by GFBurke
allthingsthatfly.com
GFBurke's Avatar
18A @ 204w with 8x6 GWS HD prop
Hmm, no so sure my 15A esc is going to like this 8in prop.

14.6A @166w with 8x4 GWS HD prop
That's better.

She will still move ok at 166w?
I'll weigh it in soon.
Last edited by GFBurke; Feb 21, 2009 at 06:44 PM.
Old Feb 21, 2009, 06:51 PM
smokejohnson is offline
Find More Posts by smokejohnson
3D wannabe
smokejohnson's Avatar
I hope it will fly ok at 166w...I don't think my set up will be over 100 . I'm not done yet but it looks by tossing everything on the scale I should be just under 10 ounces.
Old Feb 21, 2009, 10:55 PM
GFBurke is offline
Find More Posts by GFBurke
allthingsthatfly.com
GFBurke's Avatar
308g RTF (with lipo)
218g RTF (no lipo)
Old Feb 22, 2009, 12:21 AM
LiveSquid is offline
Find More Posts by LiveSquid
Registered User
LiveSquid's Avatar
Say, did any of you guys have any trouble getting the motor mount properly centered?

I dont want to end up cementing it down and now the motor always pushes just a little bit left. Ya know?
Last edited by LiveSquid; Feb 22, 2009 at 01:24 AM.
Old Feb 22, 2009, 07:43 AM
smokejohnson is offline
Find More Posts by smokejohnson
3D wannabe
smokejohnson's Avatar
I glued mine down last night. I just lined up the diamond shape with the seam down the middle. It looks straight, the prop is the same distance from the wing on both sides anyhow.
Old Feb 22, 2009, 08:11 AM
smokejohnson is offline
Find More Posts by smokejohnson
3D wannabe
smokejohnson's Avatar
I just realized this morning that I kind of screwed up. I slid the motor as far forward as I could and still have clearance for a 7" prop. I checked the balance and it worked out great so I glued it. Now for the dumb part...I don't have my wingtips glued on . I may end up having to add a little dead weight in the nose now to get it balanced. Oh well you live and you learn.
Old Feb 22, 2009, 10:37 AM
More Trim is offline
Find More Posts by More Trim
More Trim
More Trim's Avatar
Nice batt hatch.



Quote:
Originally Posted by smokejohnson
I just realized this morning that I kind of screwed up. I slid the motor as far forward as I could and still have clearance for a 7" prop. I checked the balance and it worked out great so I glued it. Now for the dumb part...I don't have my wingtips glued on . I may end up having to add a little dead weight in the nose now to get it balanced. Oh well you live and you learn.
Old Feb 22, 2009, 11:15 AM
smokejohnson is offline
Find More Posts by smokejohnson
3D wannabe
smokejohnson's Avatar
Thanks
Old Feb 22, 2009, 11:46 AM
FlyingLakland is offline
Find More Posts by FlyingLakland
Sideslip!
FlyingLakland's Avatar
what are you guys talking aboiut, i dont see any hatch?
Old Feb 22, 2009, 11:49 AM
Diggs is offline
Find More Posts by Diggs
Not your average DiggsyBear
Diggs's Avatar
Quote:
Originally Posted by FlyingLakland
what are you guys talking aboiut, i dont see any hatch?

https://www.rcgroups.com/forums/show...&postcount=779

post 779. Great job.

Diggs
Old Feb 22, 2009, 11:52 AM
FlyingLakland is offline
Find More Posts by FlyingLakland
Sideslip!
FlyingLakland's Avatar
Quote:
Originally Posted by Diggs
ohhhhhhhhhhhh. thanks i got kinda freaked out there for a second haha
Old Feb 22, 2009, 12:12 PM
LiveSquid is offline
Find More Posts by LiveSquid
Registered User
LiveSquid's Avatar
Quote:
Originally Posted by smokejohnson
Thanks
Yeah, it really is. Ill likely do the same n mine. But wheres the ESC? I would suspect that its somewhere in the battery/receiver compartment.

I'm also waiting till the very last minute to attach my wingtips. Being able to just toss it around and turn it upside down while working on it is a necessity.

Is the tape not sticking very well on you guys foam as well? Packing tape is useless and even the 'clear' duct tape can be peeled right off.
Old Feb 22, 2009, 12:18 PM
dekan is offline
Find More Posts by dekan
D'oh.. Dumb Left Thumb
dekan's Avatar
Prep the foam with 3M 77 or UHU creativ/ Por and tape will stick no problem...

That is one big hole in the foam Smoke... I hope you have got some plan to beef the front of wing up...
Old Feb 22, 2009, 12:22 PM
LiveSquid is offline
Find More Posts by LiveSquid
Registered User
LiveSquid's Avatar
You mean the spray adhesive? Well, dammit.. Im off to the store. AGAIN. lol Hope I can get that at the neighborhood hardware shop.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Good setup for a MSComposit Swift II ? myrslakt Foamies (Kits) 4 Oct 10, 2009 03:30 PM
Video Swift II Maiden Sim69 Electric Plane Talk 3 Jan 28, 2007 12:32 AM
Sold Swift II Airbrush line British Scheme Twinkletoze Aircraft - Electric - Airplanes (FS/W) 0 Jan 05, 2007 11:58 PM
Discussion Swift II from MS Composit? db1 Flying Wings 14 Dec 11, 2006 08:13 PM
Discussion My Swift II + Question highboy Flying Wings 2 Nov 29, 2006 12:05 PM