Has any one used lipo packs for transmitters - RC Groups
Thread Tools
Jun 28, 2006, 09:04 PM
Registered User

Has any one used lipo packs for transmitters

I Would like to use a 3s 1500 - 1800 lipo preferably polyquest because i have had trouble free use with them for a couple of years. Has any one done this yet? the two transmitters I would convert would be the Optic 6 and the Prism7X the only question I have is will the 12.6 volt full charge level exceed any input limits as of this time I have not had a response from Hitec yet

The upside would be at about 200ma load on the battery you can fly quite a while useing as many planes as you can fit in the car
Sign up now
to remove ads between posts
Jun 28, 2006, 09:17 PM
Registered User
ebill3's Avatar
Hi, welcome to RC Groups. Yes, several have used LiPos in their TX and there have been many threads.

On the main radios forum page, go to the upper right and click on "Search this Forum" Type just "lipo" and hit enter - you will get a bunch of threads addressing your question.

Jun 28, 2006, 09:20 PM
Registered User
ebill3's Avatar
Here is one thread that addresses the Prisim. https://www.rcgroups.com/forums/show...highlight=lipo
Jun 28, 2006, 11:43 PM
FHSS won Europe hitherto

forget about lipo.

Look at this, it is in German, but the images show the realised idea.


Greetings, Rudy V.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion spt has any one used this esc john wing Flying Wings 2 Jan 26, 2007 06:57 PM
Has any one used these Lipo's eldorado Electric Plane Talk 2 Dec 05, 2005 06:15 PM
has any one used the align 305 mm woodies on the shogun falcon41176 Mini Helis 4 Apr 10, 2005 08:08 PM
has any one used rcworld.co.uk? littleport2003 Fuel Plane Talk 2 Dec 22, 2004 07:19 PM
Has any one used one of these? littleport2003 Fuel Plane Talk 7 Sep 29, 2004 07:26 AM