New Products Flash Sale
Thread Tools
Old Jul 26, 2002, 11:06 PM
Bonafidepirate is online now
Find More Posts by Bonafidepirate
define("BEASTMODE", "1");
Bonafidepirate's Avatar

GWS 300C "B", Oil it or not?

Like the subject says, should I oil my GWS gearbox in my Switchback or run it like it is? I have about 10 or 12 flights on it now, without oil. It's starting to make a "vibration" noise at around 1/3 throttle.
Sign up now
to remove ads between posts
Old Jul 27, 2002, 12:18 AM
Martin Hunter is offline
Find More Posts by Martin Hunter
Leave me alone!
Martin Hunter's Avatar
Not that this answers whether you "should" or "shouldn't" but I never did, and mine performed flawlessly through 65 flights. When it did die, it was all at once and not gradually over time. Check your prop alignment and balance.

Old Jul 27, 2002, 12:52 AM
Jim Winget is offline
Find More Posts by Jim Winget
Registered User
A lot depends on the oil you select. You need to be a little careful. Many of the light oils may contain petroleum products that reduce the life of the plastic. There are special purpose oils and greases made for use with plastic gears. I found some in the train department at a local hobby store. Also available are cermanic greases that work well both for plastic and metal.

All that said, I did use a light 3-in-one like oil on a gws gearbox about a year and a half back and I haven't see any ill effects (yet).

It will be interesting to learn what others have found.

Old Jul 27, 2002, 01:44 AM
Bonafidepirate is online now
Find More Posts by Bonafidepirate
define("BEASTMODE", "1");
Bonafidepirate's Avatar
Thanks for the replies!

Doug suggested that I check the prop also. Now that I think of it, the noises started when I changed from my APC 9x6 SF to a GWS 9x7, and I was in such a hurry to beat the dark that evening, that I never checked the prop, and today was the first time I flew since then. So I'll try that before the next flight.

On the subject of oils, I used some 3-in-1 on my first DX-A, which contains "petroleum distillates", and never had any problems with the gears, the motor just died of old age.

Thanks again.

Old Jul 27, 2002, 09:55 AM
Dave Hederich is offline
Find More Posts by Dave Hederich
Registered User
Any wet lubricant will only serve to pick up dirt and dust that will negatively impact performance. I've been using powdered graphite with good success. There are several different dry lubricants that are widely available.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 4" Spitfire flies! (believe it or not) rguillot Scratchbuilt Indoor and Micro Models 141 Jan 25, 2007 01:47 PM
To oil or not to oil? olddog Electric Plane Talk 22 Jan 18, 2005 12:43 PM
GWS Dragonfly Main Motor? To Break in or Not? gbagley Micro Helis 6 Oct 30, 2003 09:43 PM
Which is better: GWS 300C 5.33:1 combo or Mpjet 5:1 with s300? Spaulding Parkflyers 10 May 09, 2002 06:35 PM
WTB: EPS-300C-"CS" for GWS Zero cfossa Aircraft - Electric - Airplanes (FS/W) 0 Apr 14, 2002 09:20 AM