Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 18, 2006, 10:46 PM
Registered User
Discussion

New EP 8 discussion thread (Quick of Japan)


For a Newbie punk like me

just wanting a stable heli that is good for general normal right side up flight

will upgrade to inverted capeable motor when ready

Any help appreciated

Im just waiting for my ep8 to arrive and will be building it asap
Last edited by zx12rRed; Jun 19, 2006 at 11:37 PM. Reason: The other one to long now
Sign up now
to remove ads between posts
Jun 18, 2006, 10:57 PM
Conformity Kill's
right now my ep8 is running on 4s emoli's.

setup
hacker a30 10L
17t pinion
cchv45
ubec 35v
stock everything else

this setup flys real steady. climb outs kinda suck, but for everyday tooling around (10 - 12 min) its good.


I plan on switching out the motor to an A30 8XL and move to 5s emoli as soon as the Rotorworkz frame is avail.

its a real good heli, mines gounded until I get a few parts. (spun it up too close to a curb and wiped out the tail blades and tail shaft).

Geneween
Jun 18, 2006, 11:13 PM
Registered User
so what does ubec mean ? is that the esc ?
cchv45 ? sorry dont know what that is either

what batterys are you using

Thanks

I was going with hacker a30 10 with a 20 tooth pinion, i notice your using 17, is 20 alright or go with 17
Jun 18, 2006, 11:19 PM
Registered User
Theother ep8 thread is to long now and a lot of the info is old

new to get a new one going
Jun 18, 2006, 11:23 PM
Renewed interest
ozace's Avatar
CC HV45 is the esc, Castle Creations high voltage 45 amp esc.
uBec = koolflightsystems.com the HV esc is opto and needs a seperate bec to power the electronics.
He is using 4s V28/Emoli cells.
Jun 18, 2006, 11:44 PM
Conformity Kill's
thanks Ozace I should have been more clear.
17t pinion gets the motor to about 140deg. at 90% throtle. I would think a 20t would make the motor run a bit hotter. I get over the 2K mark with the 17t and thats good for me.

ween
Jun 19, 2006, 06:31 AM
KF4IVP
34Ford's Avatar
Wow Geneween.
I am going to have the same setup except for the batteries.
All I have is 4 packs of 3S 2100's I hoping I can run a pair in parallel. Just hope their not to heavy.

Im waiting on the HV45 right now, I ordered one and they sent a HV85 for the 45 cost!
Jun 19, 2006, 10:13 PM
Registered User
Gene, Will the A30 8Xl not fit in stock frame? I am ordering one and wanted to use the 5 emoils. Even after reading the whole darn other thread I wasn't sure. Kinda glad there's a new one.
Marv
Jun 19, 2006, 10:29 PM
Renewed interest
ozace's Avatar
A30-xl certainly fits the stock frames, i had one in mine for a time.
Jun 19, 2006, 11:25 PM
Conformity Kill's
yup the a30 fits with room to spare... I really like the setup. just wish i didn't hose the heli into a curb during spool up. I going to the "SE" frame because it fit's the emolis better and I hate the skids on this thing bends real easy.

geneween


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Quick Japan QJ-8 AKA EP-8 BRAND NEW NEVER FLOWN! FlybyPDX Aircraft - Electric - Helis (FS/W) 13 Mar 16, 2006 01:13 AM
Quick Japan Ep-8 AnnihilaT Electric Heli Talk 40 Jan 16, 2006 01:47 PM
Yippee! new helicopter QJ-EP8D, von Quick Japan michel pet Micro Helis 8 Oct 04, 2005 12:22 PM
Quick Japan EP-8 ! oded mazor Electric Heli Talk 22 Sep 26, 2005 12:50 PM
Sold Quick Heli's EP 8 for sale (New in the box) Divemaverick Aircraft - Electric - Helis (FS/W) 4 Jul 02, 2005 07:12 PM