Help with CJM rotating Corsair retracts!? - RC Groups
Thread Tools
May 26, 2006, 04:46 PM
Registered User
rmeflyerkid's Avatar

Help with CJM rotating Corsair retracts!?

Hello,Im finishing up my .60 sized top flite corsair and am running into some troubles with the retracts..Im using CJM 90 degree rotating retracts and the wheels wont rotate fully when they go up in to the well...Its pretty disappointing.I think its the spring that wraps around the upper arm that controls the rotation but this spring would have to be super tight to make these rotate quicker..Any thoughts?Someone must have had this problem also..I made a video of the problem..please check it out and help me!!Thanks,Dustin
Sign up now
to remove ads between posts
May 26, 2006, 05:55 PM
Keep building, buying,fly
Bigplumbs's Avatar
Man those retracts are fast. I have just put a set of mechanicals in my little P40. They are hanger 9 from their corsair and work quite sweet here is a little video of them
May 26, 2006, 05:59 PM
Registered User
rmeflyerkid's Avatar
I just emailed CJM and they responded in about 20 min..the guy also said they were way too fast and should be slowed down with an adjustable valve or collet on the line...i think ill order a valve and that will slow down the speed giving the strut time to rotate...should solve the problem..i hope

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Help with an alfa corsair. afrotc19 Electric Warbirds 7 Feb 20, 2007 10:39 AM
Need help with 17" Corsair vise101 Scratchbuilt Indoor and Micro Models 104 Dec 24, 2003 03:04 PM
Help with GWS P-51 retracts electromonkey Parkflyers 4 Feb 23, 2003 07:31 PM
Need help with glow to electric Corsair conversion Pilot_Tony Scale Kit/Scratch Built 12 May 28, 2002 02:01 PM