Carbon Fiber vs. Fiberglass - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
May 01, 2006, 03:18 PM
Registered User
Chatenever's Avatar
Question

Carbon Fiber vs. Fiberglass


I'm just getting started building flat wing foamy profile models. Which do you prefer for stiffeners on the body, wing, and stab ... carbon fiber or fiberglass? Rod or tube? And how do you select what diameter tube or rod you're going to use? Most of the foamy plans I've seen don't specify.
Sign up now
to remove ads between posts
May 01, 2006, 03:40 PM
Registered User
I prefer carbon fiber for its stiffness over fiberglass. Look at as many plans as you can to see how other people have done it for simular sized planes. I use 4mm = 5/32in. carbon fiber tubes for planes from 28 to 40 inch wingspan built out of 1/4 inch foam.
May 01, 2006, 04:56 PM
Registered User
Chatenever's Avatar
Quote:
Originally Posted by rockin' roller
I use 4mm = 5/32in. carbon fiber tubes for planes from 28 to 40 inch wingspan built out of 1/4 inch foam.
Is that for EPP foam or something more rigid,... or does it matter?

B
May 01, 2006, 08:04 PM
Dismembered Member...
arx_n_sparx's Avatar
Robert: If you are going to use EPP, you should visit this thread: https://www.rcgroups.com/forums/showthread.php?t=382174
Sloper Steve, Dave North et al can fill ya in on it. FG is much cheaper....

Brad
May 03, 2006, 02:00 PM
Registered User
Quote:
Originally Posted by Robert Chateneve
Is that for EPP foam or something more rigid,... or does it matter?

B
I don't think it matters much, because that size carbon fiber is very stiff, but I build from Bluecor FFF mostly, and it is fairly ridgid by itself.
May 03, 2006, 04:31 PM
KZ RIDER
raythomas's Avatar
Don't know if this matters, but I found a great place (or so I thought) for cheap fiberglass rods to use on the wings of FFF profile planes. Its umberellas. They usually have 1/8 inch or so fiberglass rods in them, you have to work carefully to get the plastic pieces off them but they are free. I think a good bit heavier than CF though. Just my two cents. Ray


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Carbon fiber vs kevlar (aramid) vs glass? icmartin Slope 17 Oct 31, 2013 03:53 PM
Discussion Carbon Fiber vs. Aluminum? csc Sailplane Talk 28 Jul 08, 2007 12:57 PM
Discussion carbon fiber v. fiberglass T-Rex 450 canopy bobthehobo9 Mini Helis 2 Apr 09, 2007 12:26 AM
Question carbon fiber vs. aluminum sgtdirt The Builders Workshop 8 May 16, 2005 12:09 PM
Fiberglass strapping tape VS carbon fiber...... gpw Foamies (Kits) 10 Sep 09, 2002 10:10 AM