A-10 Kyosho Motor Conversion Battery Recommendation. - RC Groups
Thread Tools
Jul 30, 2001, 10:30 PM
Real Men Fly Pink Planes...
kepople's Avatar

A-10 Kyosho Motor Conversion Battery Recommendation.


I am building the K&A A-10 that sparked all the stink about KP44's.

SO...

I went with the Kyosho motors and seperate Fans. They are supposed to be wired in Parallel...

What batteries should I try?

CP1300's? or 800AR's

Thanks for your help
Kirby
Sign up now
to remove ads between posts
Jul 31, 2001, 02:21 AM
Speed Demon
GregG's Avatar
They're close to the same weight, I'd go with the CP1300's.
Jul 31, 2001, 11:04 AM
Registered User
Ed Waldrep's Avatar
Definitely go with the new CP1300s. Diversity Model Aircraft has them, there's a new ad in the Sept S&E Modeler magazine. www.flydma.com
Weight quoted is 35 grams, dimensions 23 x 27mm. They are short and squat, so the'd be much easier to fit into the fuselage than the tall and skinny 800ARs, which weigh 36 grams each.
Of course, 600AEs weigh 22 grams a piece, so you'd have a lighter all up weight. I don't know if anyone has flown the micro A-10 with larger cells, may have to do some searching on that. There's also 1000mah NiMH batteries that are the same size and just a bit heavier than 600AEs. DMA carries them as does www.batteriesamerica.com. You'd need to add an extra cell to make up for the lower voltage but you'd still have a lighter pack than the 1300s.
Jul 31, 2001, 11:48 AM
jrb
jrb
Member
jrb's Avatar
10x500AR/600AE is the recommended pack. 1300s would seem to add a lot of weight and 11+ cells often goes beyond ESC's cell count.
Jul 31, 2001, 10:51 PM
Electric Coolhunter
Thomas B's Avatar
My Dare A-10 with Johnson 180 motors in parallel does well on 10X600AE and that is what I plan to use on my next pair of KP-44 fans and the Kyo DMC motors. I do not beleive the 10X800ARs will fit very well in the K&A A-10, and the wing loading will go up noticably.

Keep it light!
Latest blog entry: 2014 events and travel
Aug 01, 2001, 12:22 AM
Real Men Fly Pink Planes...
kepople's Avatar
Thanks for the input. I ordered to CP1300's today. hope they fit...