Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 03, 2012, 04:31 PM
WooHoo!
woodybob's Avatar
E-Z Up Sierra II 10x10 Canopy



Sign up now
to remove ads between posts
Jun 03, 2012, 05:39 PM
Grumpa Tom
Kmot's Avatar
Is that what you have?
Jun 04, 2012, 01:44 AM
WooHoo!
woodybob's Avatar
I have the old "Dome" which neeeds a new canopy that is no longer available. Prolly 15 years old. Gonna see if the kids will update my shade needs for Fathers day with one of these or a "Dome II".
Jun 04, 2012, 11:45 AM
Grumpa Tom
Kmot's Avatar
Well, I hope you get it!

I bought a Coleman 12x12. Three of the tubes in the frame got wrecked. I have some raw material on the way. I am going to cut/drill/install replacements and get it back into working condition. The top did not get damaged, and just the day before I had applied some 303 UV protectant.
Jun 04, 2012, 02:32 PM
Retired for now
Sam's Club sells a Ez-up 10x10 for $195 and it's a good one too. Very solidly built too. Pete
Jun 04, 2012, 03:17 PM
FROM THE MIND OF A MADMAN
gpzy's Avatar
12' x 12' EZ-UP 95 dollars at Big 5
Jun 04, 2012, 05:22 PM
Retired for now
Got a picture or a link? What's a Big5? pete
Jun 04, 2012, 06:11 PM
FROM THE MIND OF A MADMAN
gpzy's Avatar
Big 5 is a sporting goods company in So Cal.

http://big5sportinggoods.shoplocal.c...&searchtext=ez up&go=Go
Jun 05, 2012, 05:08 PM
ir3
ir3
Registered User

Engel TMAX II Problem


I think some of the folks on this thread have some experience with Engel Subs and specifically the TMAX II. After turning on the system, everything goes to the out of water condition, i.e. ballast tanks empty, both yellow led's are lit, both red led's, and green mode led unlit. green power level led bright. I get 0V on the MOT connections. I assume, from Engel diagrams, that the ESC's should be connected to MOT. Also the TAES is installed. I can not get power to the ESC's for the two prop motors. The piston tanks are getting full power and they move from out of water to submerge when I move the dive switch, K5, through its positions. I once got 5V at the MOT terminals but never again.

Any one know what is happening and how to solve the problem. I emailed Engel but that could take time before they answer.

Thanks,

Iran
Jun 05, 2012, 05:09 PM
Grumpa Tom
Kmot's Avatar
Iran, there is a Submarine Forum here in the Boats section. You would probably get tons of help in there.

https://www.rcgroups.com/submarines-60/
Jun 06, 2012, 07:38 AM
Registered User
What do you need from big 5. there is one next to the hardware store (in my small home town) and I can see?
Foo
Jun 06, 2012, 10:06 AM
ir3
ir3
Registered User
Thanks Tom,

Forgot about the Sub Forum.

Iran
Jun 06, 2012, 04:18 PM
Grumpa Tom
Kmot's Avatar
Quote:
Originally Posted by Kmot View Post
Three of the tubes in the frame got wrecked. I have some raw material on the way. I am going to cut/drill/install replacements and get it back into working condition.
Crap. The special tubing I ordered arrived today. It is not the same size as what is on the frame already. Measure twice, cut once. I screwed up. In my defense, it is the ONLY flat side oval tubing I could locate ANYWHERE.

I'm screwed..........
Jun 06, 2012, 08:00 PM
WooHoo!
woodybob's Avatar
Try this place, http://www.canopymasters.com/ Build one to suit your needs and use the Coleman for family outings and a day at the puddle. The silver tarp lasts for years, you can bolt the legs down to your patio so the wind won't carry it away. Lot's o' options.

Jun 06, 2012, 08:45 PM
Registered User
Tim B.'s Avatar
Now THAT looks like it otta do it ...
Last edited by Tim B.; Aug 10, 2016 at 12:31 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Video Hansen Dam Lake "Irregulars" Weekly Video Kmot Dock Talk 9 Feb 03, 2008 12:22 AM
Gallery Woodie on Hansen Dam Lake Kmot Dock Talk 13 Aug 12, 2006 03:27 PM
Gallery Micronaut's Amsterdam Tug @ Hansen Dam Lake Kmot Scale Boats 11 Mar 22, 2006 09:33 PM
Gallery More Hansen Dam Lake videos! Kmot Scale Boats 2 Mar 17, 2006 09:44 PM
Gallery Steve C.'s Corvette @ Hansen Dam Lake Kmot Scale Boats 2 Mar 17, 2006 07:23 PM