Thread Tools
Jul 26, 2012, 09:13 AM
Bruce
Quote:
Originally Posted by tntpower1
On another post you said the e-gyro for the vmx was "on the truck", any news, thanks!
That was my bad. I saw the shipping notification and what was on the order but I failed to notice that the e-gyro kits where marked as back ordered. So not yet.

Bruce
Sign up now
to remove ads between posts
Jul 31, 2012, 12:11 AM
Suspended Account
It's wonderful job dude keep it up.
Aug 03, 2012, 06:31 PM
adrian
Hi Bruce,
Adrian from Brisbane here. Had first competitive race night with the KP12E which i purchased from you. Had a small crash which has broken fork leg on the thread where the bottom collar screws on. Which has also bent the shaft. Have taken some photo's for you to have a look at and maybe have a talk to Keith at KP to see whether if he will replace the forks. Where it has broken is on the thread which is very thin,Compared to my KP10 forks, which i have not had a problem with. It just looks like it has been machined too thin, in my opinion. Being a fitter and turner by trade have a bit of knowledge in this area.
Aug 06, 2012, 12:12 AM
Bruce
Quote:
Originally Posted by adrian46
Hi Bruce,
Adrian from Brisbane here. Had first competitive race night with the KP12E which i purchased from you. Had a small crash which has broken fork leg on the thread where the bottom collar screws on. Which has also bent the shaft. Have taken some photo's for you to have a look at and maybe have a talk to Keith at KP to see whether if he will replace the forks. Where it has broken is on the thread which is very thin,Compared to my KP10 forks, which i have not had a problem with. It just looks like it has been machined too thin, in my opinion. Being a fitter and turner by trade have a bit of knowledge in this area.
Sounds like it might be a defect. Keith should be able to take care of this for you. Let me know how it goes.

Bruce
Aug 06, 2012, 05:34 PM
Registered User
Hi Bruce...when is going to be avilable the Ducati Nitro again?
Thank you.
Aug 06, 2012, 10:20 PM
Bruce
Quote:
Originally Posted by HECTOR2369
Hi Bruce...when is going to be avilable the Ducati Nitro again?
Thank you.
The distributor in the USA says they are discontinued but they seem to be available in other countries. I am still trying to get them but I don't know if I can.

Bruce
Aug 07, 2012, 12:57 AM
100% _Maybe
Rob1o1's Avatar
Hi Bruce,

Its possible that my emails via the website are not getting to you, or your reply to me. But I want to know if I can get just a rear zh racing wheel for the sb5 by itself? I see that the set with hubs is available. I have the front wheel and the rear hub but never got the rear wheel off the previous owner. It's the orange ZH wheel.

Also, do you have the chassis upgrade for the Nuova Faor SF501 (nitro) to the SF 509 with the upright servos?

I have a few thing sitting in my cart for the VMX450 and SB5.

thanks.

Rob.
Aug 07, 2012, 02:45 AM
kpd
kpd
Registered User
Quote:
Originally Posted by adrian46
Hi Bruce,
Adrian from Brisbane here. Had first competitive race night with the KP12E which i purchased from you. Had a small crash which has broken fork leg on the thread where the bottom collar screws on. Which has also bent the shaft. Have taken some photo's for you to have a look at and maybe have a talk to Keith at KP to see whether if he will replace the forks. Where it has broken is on the thread which is very thin,Compared to my KP10 forks, which i have not had a problem with. It just looks like it has been machined too thin, in my opinion. Being a fitter and turner by trade have a bit of knowledge in this area.
We have contacted Adrian and replaced the leg. We are a bit concerned as the forks do not look like our HF40 forks which we supply with the KP12e, as they should be a bright blue colour, and are stronger than the earlier models.
If you have any further problems keep in touch - Keith P.
Aug 07, 2012, 11:41 AM
Registered User
Quote:
Originally Posted by slawsonb
The distributor in the USA says they are discontinued but they seem to be available in other countries. I am still trying to get them but I don't know if I can.

Bruce
Bad news but,are they going to continue producing the electric Ducati?
Thank you again.
Aug 07, 2012, 04:45 PM
Bruce
Quote:
Originally Posted by Rob1o1
Hi Bruce,

Its possible that my emails via the website are not getting to you, or your reply to me. But I want to know if I can get just a rear zh racing wheel for the sb5 by itself? I see that the set with hubs is available. I have the front wheel and the rear hub but never got the rear wheel off the previous owner. It's the orange ZH wheel.

Also, do you have the chassis upgrade for the Nuova Faor SF501 (nitro) to the SF 509 with the upright servos?

I have a few thing sitting in my cart for the VMX450 and SB5.

thanks.

Rob.

Sorry I have been swamped with email and have a hard time keeping up.

I may be able to price the wheels separately. Give me until the weekend to work out the pricing.

I do not carry much NF stuff anymore. They are such a pain in the ass to deal with.

Bruce
Aug 07, 2012, 04:50 PM
Bruce
Quote:
Originally Posted by kpd
We have contacted Adrian and replaced the leg. We are a bit concerned as the forks do not look like our HF40 forks which we supply with the KP12e, as they should be a bright blue colour, and are stronger than the earlier models.
If you have any further problems keep in touch - Keith P.
I don't swap out parts or even open the boxes I get from you so that must be the way it came to me.

Bruce
Aug 07, 2012, 04:53 PM
Bruce
Quote:
Originally Posted by HECTOR2369
Bad news but,are they going to continue producing the electric Ducati?
Thank you again.
As of now, yes. I have a couple in stock.

Bruce
Aug 07, 2012, 06:00 PM
100% _Maybe
Rob1o1's Avatar
Quote:
Originally Posted by slawsonb
...I may be able to price the wheels separately. Give me until the weekend to work out the pricing....

Bruce
That would be great thanks. I have a few things in my cart, so when you let me know I'll finish off the order.
Cheers.
Rob.
Aug 07, 2012, 09:25 PM
Registered User
Quote:
Originally Posted by slawsonb
As of now, yes. I have a couple in stock.

Bruce
Thank you Bruce..I hope to buy you one soon.
Aug 09, 2012, 06:59 PM
Registered User
Hi Bruce!
I have been following your products on this thread. I have a VMX 450 and would like to upgrade to the e-gyro. How much will it cost to upgrade and which items are needed as I noticed that there are quite a few parts needed?
Regards,
Nachi


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Kyosho HOR now at 2WheelHobbies.com slawsonb Motorcycles 9 Jan 06, 2007 05:55 PM
Discussion Thunder Tiger now at 2wheelhobbies.com slawsonb Motorcycles 41 Jun 21, 2006 06:46 AM