Stingray drawings Wanted - Page 2 - RC Groups
Thread Tools
Jul 11, 2006, 04:59 AM
Registered User
My own is going to use a modified recompressive ballast system. Thrust vectoring for yaw, blended stern planes for pitch and roll control ( the batwings on the cabin induce a rather large roll moment in a turn and need to be canceled out to keep control otherwise when she rolls the yaw input turns ibto a pitch moment and down it goes out of control)and the midships planes for depth keeping. I used a ten inch Lee models as a test mule and once you get the static trim dialed in it tracks straight line very nicely due to the batwings on cabin. However they are to far above the CG and meta center to use as control surfaces. I tested them as both pitch and yaw surfaces and they induced a porpising moment when in pitch and a high speed roll when used as yaw surfaces. The sternplane tips are to far out and to small to be effective yaw rudders.
Last edited by John Anderson; Jul 13, 2006 at 05:44 PM.
Sign up now
to remove ads between posts
Aug 07, 2013, 09:25 AM
Registered User
Hi Stingray 3
I have been searching around for some plans for stingray and was wondering if you were able to share or help with locating some
Many thanks
Tim Brewster
Apr 19, 2014, 10:07 PM
Registered User


Esto lo encontré en Devianart. suerte con tu proyecto.
Aug 15, 2017, 12:39 PM
Registered User


Hi Guys, are you still looking for stingray 36 inches long fibre glass well this my baby got it from studio2models UK I intend to RC her and surface model only

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Stingray drawings. 785boats Dock Talk 6 Jul 21, 2007 01:53 PM
Help! I.A.R. 822 - Drawings wanted! gardemin Scale Kit/Scratch Built 0 May 30, 2007 02:36 AM
3 dimension drawings wanted. MarkChinery High Performance 4 Aug 06, 2004 06:58 PM
MB-339 Drawings wanted Doug Cronkhite Electric Ducted Fan Jet Talk 12 Aug 27, 2003 12:14 AM