Charlotte Area Flying ::: Blythe - Page 2 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Mar 11, 2006, 07:04 PM
Spring time, planes bloom
ecologito's Avatar
Originally Posted by The Wombat
sorry message
I am sending it again.. let's see if it works this time
Sign up now
to remove ads between posts
Mar 11, 2006, 09:20 PM
Registered User
What time do you all intend to start tomorrow?
Mar 11, 2006, 09:28 PM
G G Ghost Pirates !!!
Vyceroy's Avatar
i will be there about 8:30 ..
Mar 11, 2006, 10:46 PM
Registered User
The Wombat's Avatar
I'm in DC this weekend...maybe way i'm not getting the pm. Talk to Matt tomorrow he can nextel me...I'll be on the road.
Mar 12, 2006, 06:01 PM
Registered User
rodger_ramjet's Avatar

More Pictures from Today

It was a nice day today. Too bad it was so windy. Heres a view more pictures courtesy of Pavel's camera.

Mar 12, 2006, 09:10 PM
Registered User
I had a great time. Thanks for the invitation.
Mar 12, 2006, 10:17 PM
Spring time, planes bloom
ecologito's Avatar
It was great joining everybody on the field today.

Jack, thanks a lot for the radio.
V, I will work on your motors as soon as I go offline,

Everybody, have a great week and I will see you in about 3 weeks, ( next weekend relatives are coming to town and next weekend is my wedding).

Cya'll later.

Originally Posted by The Wombat
I'm in DC this weekend...maybe way i'm not getting the pm. Talk to Matt tomorrow he can nextel me...I'll be on the road.
I talked to Matt and I think I can build something for you send me an email:
Mar 12, 2006, 10:28 PM
G G Ghost Pirates !!!
Vyceroy's Avatar
I have started a thread about setting up a swap meet . please check out the thread and let everyone know what you think ..

Swap Meet Thread
Mar 18, 2006, 07:47 PM
G G Ghost Pirates !!!
Vyceroy's Avatar
I will be at blythe around 8:30 Sunday morning to fly ..
Mar 19, 2006, 02:55 PM
G G Ghost Pirates !!!
Vyceroy's Avatar
Good day for flying .. had 8 pilots out today Had a few mishaps Sorry Tom sorry Dalton ..did get to see a spectacular Heli crash .. once again sorry tom but it was an awesome thing to watch ..

I wont be out to fly for about 3 weeks .. Im heading to Michigan then the Toledo Show .. then home for 2 weeks and then SEFF .. i will be back the middle of april .. Take care and watch for toledo updates .. if i see anything cool i will let you guys know ..

Toledo Show Link
Last edited by Vyceroy; Mar 19, 2006 at 03:06 PM. Reason: forgot to add the Tolkedo link
Mar 20, 2006, 08:16 AM
Registered User was short and sweet but what a ride!

We are gathered today to mourn the loss of a venerable aircraft. A True American Classic.... a work the right hands an aeronautical nightmare of an Assasin....that's right I'm talking about HZ's P-51 Mustang RTF.....sniffle....It was her maiden flight! Classified Government tests have sadly concluded that, because the imaginary left wing tank was "topped off" previous to takeoff...the right wing tank was never refueled which caused a strong left bank at liftoff....he never had time to gain altitude and hit the ground at 300MPH....

Crews were dispatched but it was readily apparent that it was mostly a crushed airframe, the pilot's upper torso was all that was recovered.

Airframe Restoration Expert- Vyceroy- expressed interest in examining the remains at his AeroLab...his results will be forth coming in the weeks ahead.

The Tele Sr. is fine! Apparently I over corrected the new elevator settings and she was a real handfull....too much UP! What a floater though....I needed almost every yard of the field to bring her down...she just kept floating and floating and floating....I'd been off the throttle since BEFORE I made my final approach....I just cleared the drainage ditch on the far side heading for the weeds when I just nosed her down for a rough landing and broke the hub on the cheap stock right wheel. we'll be back...

Mar 20, 2006, 08:48 AM
Registered User
Eyefly's Avatar
I need some input fellas. I spoke with Rodger this weekend and he gave me an OK to create a business card with all of our information so that we may pass it out to spectators who may be interested in joining. If you have any ideas as to what information the card needs to include, post it here. I will print a bunch of these out and they will be distributed among the members.

Here is what I have so far:

On the front:

1)Our name

2)(Google "Charlotte Area Flyers")to find our forum. I thought about listing the link but it has a bunch of dots, slashes, comas, etc. We are at the top of the page of the search.

3)Electric RC link
Perhaps with a logo from this sight.

4)I would like to include some kind of welcome statemant. "Welcome to our club" or something like that

5)List our fields in South Charlotte and North Charlotte.

On the Back:

A list of what is needed to learn to fly. This will be a bit controversial. Here is what I have in mind:

Search for "the Ultimate Slow Stick Help Thread" on This will help you learn to assemble the airplane.
1)slow stick $35
2)Spektrum radio/servos/Rx $199
3)Pixi 20 esc $34
4)Hitec CG-340 Charger $35
5)Battery (I need a few suggestions here)

All in about $300

What do you all think? Please include comments and suggestions. I want to have this done in the next few eeeks or so.

Mar 20, 2006, 11:32 AM
Registered User
" next few eeeks or so !!!!!!!!!!!!!?????????????!!!!!!!!!!!!!

Mar 20, 2006, 10:32 PM
Registered User
NCJim's Avatar
Yeah, Carl. That Alex has always been a little squeemish! I have seen him eeek out a landing or two, though. Alex - Why would you want to put anything on the back of the card? It runs the cost up significantly if you do.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Sailplane flying in Charlotte area? vpimike Charlotte Area Flyers 4 Jul 23, 2005 12:27 AM
Charlotte Area Flying Part IV Vyceroy Club Talk 342 Apr 26, 2005 08:09 AM
Charlotte Area Flying Part III MayDay Club Talk 529 Jan 26, 2005 11:15 PM
Charlotte Area Flying III Eyefly Club Talk 6 Aug 14, 2004 09:04 AM
Charlotte Area Flying ClosetRCModeler Club Talk 503 Aug 13, 2004 08:45 AM