Kyosho F-86F E conversion. - RC Groups
Thread Tools
May 27, 2001, 12:26 PM
EDF all the way!
bruff's Avatar

Kyosho F-86F E conversion.


Picked up my F-86 Saturday from Electric Jet Factory. Nice kit! Built up wing and great covering job. Going to start the conversion today. Using Midi fan, Hacker D50-18S motor and 12-14 2400ma batteries. Should only take about a week due to the amount of prefab. I'll be taking pictures and Robert will post a conversion page on his web site. He is selling the plane without the glow motor/fan package.

[This message has been edited by bruff (edited 05-27-2001).]
Sign up now
to remove ads between posts
May 27, 2001, 06:32 PM
Registered User
Bob-
I heard this plane was way too heavy to convert into electric. What is the weight of the airframe? Are you sticking retracts in it?
Thanks,
Shelby
May 27, 2001, 08:16 PM
EDF all the way!
bruff's Avatar
I'm building fixed gear. I'll weigh the fus and wings and post is here. Fan unit is the same size as the Midi fan. Keep you posted.
May 28, 2001, 11:21 AM
Electriaddict
dorysch1's Avatar
is the price including the fan and hacker setup? can't be that would be too cheap
May 28, 2001, 11:59 AM
EDF all the way!
bruff's Avatar
Price is just the airframe only. Painted fuselage weight is 12 oz. This includes internal structure and inlet. Fan mounts in the rear very simply.
May 28, 2001, 12:01 PM
Electriaddict
dorysch1's Avatar
for my next jet I am considering the coxf18 or a sabre or mig want something faster than my trainer
May 29, 2001, 02:16 AM
EDF all the way!
bruff's Avatar
I'm getting there the fan is mounted, the wing is assembled and the horizontal stab is attached. Starting to look like a F-86. Trying to decide if to use the stock radio installation or put the servo's closer to the control surface.
May 29, 2001, 09:43 AM
Stefano Spalding Baron
bruff,

Beginnerīs questions:

(sorry) How much cost the airframe (without slime motor and fan) ?

How many servos are necessary ?

Thanks
May 29, 2001, 09:49 AM
EDF all the way!
bruff's Avatar
See Electric Jet Factory (Area 51)for cost of basic airframe. Just 3 servos plus an ESC are required to control the jet. http://electricjetfactory.com/area51/
Jun 10, 2001, 02:05 AM
Flying Welder Pilot
Plane Crazy's Avatar
Bruff-
How about an update on the conversion. How's the weight looking?

Gordon
Jun 10, 2001, 02:25 AM
EDF all the way!
bruff's Avatar
Almost done radio is installed. Test run fan. Flying weight looks to be 5 lb. Using Midi fan, hacker D50-18S , and 14 2400 RC Zap cells. Taxi test by the end of the week.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Kyosho F-86F sabre (ducted Fan) rare Arf Rickey Thomas Aircraft - Electric - Jets (FS/W) 0 Feb 25, 2016 03:15 PM