Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Mar 01, 2006, 12:03 AM
skareb1986 is offline
Find More Posts by skareb1986
Registered User
Discussion

Need help on flying honey bee FP !


Hi guys, after breaking the flybar on my Honey Bee FP i decided that i needed to get a simulator to learn to be famillar with the controls 1st, so i got myself a G2 simulator. And after a couple of days of training i managed to hover with the watt electric heli ( still drfting around abit ), my question is what heli in G2 is the most simillar to my Honey Bee ? 2nd question is about my heli, i have these 2 functions on the 4 in 1 .. its gain and proportional ...what values must i set to get a fairly "non-waggy" tail .... thanks everyone !

Jonathan
Sign up now
to remove ads between posts
Old Mar 01, 2006, 12:40 AM
johndreid is offline
Find More Posts by johndreid
(My website goes here)
johndreid's Avatar
You should post this in the electric helicopter section. I'm sure some guys over there would be able to answer your question pretty quickly.

Good luck,
John
Old Mar 01, 2006, 02:09 AM
skareb1986 is offline
Find More Posts by skareb1986
Registered User
ok will do that . thanks
Old Mar 03, 2006, 05:15 PM
HKLionmane is offline
Find More Posts by HKLionmane
Registered User
Quote:
Originally Posted by skareb1986
Hi guys, after breaking the flybar on my Honey Bee FP i decided that i needed to get a simulator to learn to be famillar with the controls 1st, so i got myself a G2 simulator. And after a couple of days of training i managed to hover with the watt electric heli ( still drfting around abit ), my question is what heli in G2 is the most simillar to my Honey Bee ? 2nd question is about my heli, i have these 2 functions on the 4 in 1 .. its gain and proportional ...what values must i set to get a fairly "non-waggy" tail .... thanks everyone !

Jonathan
Hi,
can't help with G2, but....but as to the problem with 'gain' and 'proportional', I can help. These controls adjust the overall motor power and the ratio between the main motor and tail motor ( if emory serves). ny-hoo, to set these is really a trial and error exercise. Play with the settings starting with mid range values and then see what effect this has in-flight. Soon you'll get to know which way to adjust and then set a good value.
Mike


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need help on Esky Honey Bee King 2 nicholastanqingh Mini Helis 6 Apr 09, 2009 12:25 AM
Discussion need info on the esky honey bee IV slo123 Micro Helis 12 Dec 09, 2006 05:27 AM
Question Need some help/advice with Honey Bee FP! Atrio05 Micro Helis 31 Sep 25, 2006 02:04 PM
Discussion Help needed regrading honey bee FP skareb1986 Micro Helis 4 Mar 01, 2006 08:22 AM
Whoops! Need help with a Esky Honey Bee CP2 Loudad Micro Helis 0 Dec 14, 2005 04:11 PM