Thread Tools
This thread is privately moderated by Gene Bond, who may elect to delete unwanted replies.
Feb 20, 2006, 06:25 AM
Crash Master
Gene Bond's Avatar
Thread OP
Discussion

Blog?


I'm not sure I know how to Blog. It might be easier than some of the other new things I've tried, but it's still confusing
Sign up now
to remove ads between posts
May 14, 2006, 07:54 PM
Registered User

cg for the pfun40


were is a good cg to start with on the pfun40
Dec 12, 2006, 11:50 AM
__Jackass Savant__
theBOZman's Avatar
Quote:
Originally Posted by Gene Bond
I'm not sure I know how to Blog. It might be easier than some of the other new things I've tried, but it's still confusing
your blog is your own personal forum to talk about whatever you want.

Boz
Nov 25, 2008, 10:46 PM
Flutter-Bys are fun
Conehead's Avatar
Gene,
you should post some pictures of your planes and especially your backwards flying Cub. That plane still messes with my mind.
Conehead
Orrin Eldred
Honor, MI.
Jan 27, 2009, 07:08 PM
My plans are in my blog
Rusty-Gunn's Avatar
Gene, if you make more comments, and show some pics, then you'll have a starter for a blog.
Feb 20, 2009, 11:04 AM
Registered User
Prop stitches's Avatar
Gene, I finally got my (your) GYM BLUE going. I am not a fan of VEE tails, so I put a "normal" one on it, and the first time around the tail was too small, and it was like a flying squirl. I enlarged the tail, now we can do loops in the gym. Thanks for all the swell plans and planes.
If I can figure out how, I will get a video of the remaidening of it, just yesterday.

Props
May 04, 2009, 09:53 PM
Alaskan American
Zoey Taylor's Avatar
Not really sure how my post ended up here. I posted it in someones blog.
Last edited by Zoey Taylor; May 04, 2009 at 09:53 PM. Reason: Confused
Nov 19, 2009, 02:47 PM
Registered User

Center of Gravity


Wehre should i place the centre of gravity of the 24 inch simple wing?
Nov 28, 2009, 01:21 PM
just Some Useless Geek
Like the Nike commercials say, "Just Do It."
Jun 22, 2010, 04:16 AM
Registered User

easy cub...mod...good


dasd
Jul 26, 2010, 09:24 PM
KAMLOOPSFLYER
Quote:
Originally Posted by Gene Bond
I'm not sure I know how to Blog. It might be easier than some of the other new things I've tried, but it's still confusing
Really enjoyed building the gee blu- thanks for the plans.. any video of it flying?
Dec 22, 2014, 04:56 PM
Registered User

Not sure if you're still around but.......


I'm really interested in building this blue bat FF you have; however, there are some questions.

1. Is the wing 1 piece?
2. I'm assuming you're using Foam Safe CA to glue the FF together?
3. Where's the CG?
4. Have you considered using CF strips to give some lateral strength to the dihedral?
5. How did you determine/build the angle into the wings?


Quick Reply
Message:
Thread Tools