Thread Tools
Old May 18, 2001, 10:43 PM
Joe Elston is offline
Find More Posts by Joe Elston
Acme Powered!
Joe Elston's Avatar

What Covering To Use for the Chrome on my T33

HI Iam building My new T33 and would like to do the Chrome covering with the painted T-bird stripes. Can anyone tell me what to use for the chrome and where to get it? Will Chrome Ultrakote work, can you use an Iron at all on the foam? And How about the Black Baron Presto. I cant get either locally any suggestions would be appreciated.
Thanks Joe
Sign up now
to remove ads between posts
Old May 19, 2001, 12:06 PM
Haldor is offline
Find More Posts by Haldor
EDF Head
Haldor's Avatar
Presto would be better for the foam as the iron will easily melt it if you run the temp too high. I have covered a foam fuse with Oracover once and it worked okay with the temp set low - yet it could melt it if kept still for a couple of secs.

Havent done a chrome finish yet myself so cannot comment furter.
Old May 21, 2001, 10:01 AM
kevin is offline
Find More Posts by kevin
Registered User
kevin's Avatar
goldberg , now hangar 9, ultracote plus.
RCG Plus Member
Old May 21, 2001, 10:04 AM
Joe Elston is offline
Find More Posts by Joe Elston
Acme Powered!
Joe Elston's Avatar
Yup Kevin I was lucky enough to find two rolls of Ultrakote plus in Chrome at a hobby store only 30 minutes away. Thanks
I am starting it today and will apply it in panels I will post pics on my site when its done.
Thanks Joe

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
What can I use for my work bench underlay to put pins into? ontheweekend The Builders Workshop 26 Sep 17, 2006 01:33 AM
Discussion What do I use for makin a female mold from my plug. Tumbler The Builders Workshop 11 Feb 26, 2006 08:22 AM
What are all these wires on my lipo for? randall1959 Electric Plane Talk 17 Sep 07, 2005 01:22 PM
What are the extra 3 wires on my li-po for? fixed3d Batteries and Chargers 7 Jan 23, 2005 09:26 AM
What stick to use for rudder on a rudder-only plane? tww1fa Beginner Training Area (Aircraft-Electric) 8 Mar 16, 2004 06:28 PM