New Products Flash Sale
Thread Tools
Old May 27, 2006, 10:24 AM
Jeremy Z is offline
Find More Posts by Jeremy Z
Senior User
Jeremy Z's Avatar
rycomm? Going twice...

If he doesn't reply, the first person (Piledriver) to have requested two will get his second one.
Sign up now
to remove ads between posts
Old May 27, 2006, 10:55 AM
snolord1 is offline
Find More Posts by snolord1
Krued Up
snolord1's Avatar
you've prob. posted already,if you did i apologise.
what's the total i have to send to you?
Old May 27, 2006, 11:14 AM
Twin-Jet-Crash is offline
Find More Posts by Twin-Jet-Crash
Registered User
Twin-Jet-Crash's Avatar
Quote:
Originally Posted by Jeremy Z
*snip*
Twin-Jet-Crash - wanted 2, will get 1, sorry.
*snip*
I don't think that anything to apologize for..

I just wanted to have Höllein's email address so that i could by two, for me and a friend.
I think it would be less than economical to order a FunJet to the US, then ship it back to Norway (which is in Europe, not to far from Germany for those who don't remember geography from school )

Allthough, if it would be possible that one of the planes was shipped in a different direction (me ofcourse paying shipping for that on my own) and that I could get the plane for the same price you are paying for it?
Old May 27, 2006, 12:14 PM
SPEED-E-FLYER is offline
Find More Posts by SPEED-E-FLYER
INDORUS EXPARAMINTO
SPEED-E-FLYER's Avatar
Payment sent

Thanks guys for your effort.
Just wish I had one to take to SMALL next weekend
See you there Stringfly

Larry
Old May 27, 2006, 03:09 PM
Piledriver is offline
Find More Posts by Piledriver
almost slackin
Thanks so much for the leg work you guys have done on this deal. Let me know if I'll be paying for one or two and I'll send the money Paypal ASAP.
Old May 27, 2006, 05:01 PM
rycomm is offline
Find More Posts by rycomm
Flyin' Ryan
I'm in Jeremy. I've been kinda busy, and this just took off in the last couple of days. I de Mega'ed the EZGE, so I've got a motor ready! My Stryker is just too slow now. Where and how much do I need to paypal?

Thanks, Ryan
Old May 27, 2006, 10:46 PM
STRINGFLY is offline
Find More Posts by STRINGFLY
Registered User
STRINGFLY's Avatar

Funds..


Funds on the way... ready to ship all as soon as they arrive.
STRINGFLY <>++++
Old May 28, 2006, 02:11 AM
supershuey is offline
Find More Posts by supershuey
damn gravity again
supershuey's Avatar
hi all

any body know where the c+g is on this funjet cant do maiden
with out,

cheers if u do
Old May 28, 2006, 03:34 AM
styroglue is offline
Find More Posts by styroglue
Registered User
styroglue's Avatar
Quote:
Originally Posted by supershuey
hi all

any body know where the c+g is on this funjet cant do maiden
with out,

cheers if u do
See the image, the cg is 30 mm ( 1 1/5 inch ) behind the leading edge.

Happy maiden, and be sure to launche her up in an angle of appr.30 degrees, otherwise she will bite the dust.

Rob
Old May 28, 2006, 03:52 AM
ModelTony is offline
Find More Posts by ModelTony
Registered User
ModelTony's Avatar
Quote:
Originally Posted by styroglue
See the image, the cg is 30 mm ( 1 1/5 inch ) behind the leading edge.

Happy maiden, and be sure to launche her up in an angle of appr.30 degrees, otherwise she will bite the dust.

Rob
Have you tried any 'up Elevon' on takeoff? Multiplex USA recommend 3mm up on the microjet and I find if you use that take-offs are easy, if not you have to walk about 25ft to pick up the model.

Tony
Old May 28, 2006, 04:07 AM
supershuey is offline
Find More Posts by supershuey
damn gravity again
supershuey's Avatar
great thanx

off too maiden

cheers
Dylan
Old May 28, 2006, 05:12 AM
Jeremy Z is offline
Find More Posts by Jeremy Z
Senior User
Jeremy Z's Avatar
Quote:
Originally Posted by rycomm
I'm in Jeremy. I've been kinda busy, and this just took off in the last couple of days. I de Mega'ed the EZGE, so I've got a motor ready! My Stryker is just too slow now. Where and how much do I need to paypal?

Thanks, Ryan
Check your PMs. I'm pretty sure I copied you with the payment instructions. So you're officially on the list.
Old May 28, 2006, 05:41 AM
styroglue is offline
Find More Posts by styroglue
Registered User
styroglue's Avatar
Quote:
Originally Posted by ModelTony
Have you tried any 'up Elevon' on takeoff? Multiplex USA recommend 3mm up on the microjet and I find if you use that take-offs are easy, if not you have to walk about 25ft to pick up the model.

Tony
Tony,

we had just one flight due to the poor weather we have at the time.
If the balance is right the start will be easy when you launche her upwards.
During the flight we had to trim her up. The next start with the 2mm up-trim
was even easyer.
Maybe the angle of the motor has to be ajusted allso.
I gave the motor a bit of tilt, 2 stripes on the motormount-scale.
Anyway, we have to fly this baby a couple of times to trim her wright.

Rob
Old May 28, 2006, 05:57 AM
finishman2000 is offline
Find More Posts by finishman2000
nooobama
Jeremy, payment sent. Thanks again, Cas
Old May 28, 2006, 06:39 AM
TreeDiver is online now
Find More Posts by TreeDiver
BrainFart RC-Pilot
TreeDiver's Avatar
Quote:
Originally Posted by ModelTony
Have you tried any 'up Elevon' on takeoff? Multiplex USA recommend 3mm up on the microjet and I find if you use that take-offs are easy, if not you have to walk about 25ft to pick up the model.

Tony
Hi Tony,

See my other reply with the picture.
You need to pay attention that the elevon is in one line at the body side next to the fin.

Rob

https://www.rcgroups.com/forums/show...&postcount=132


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Multiplex funjet ouluckydogu Aircraft - Electric - Jets (FS/W) 7 Jul 24, 2006 05:01 PM
Sold Multiplex Funjet NIB bruff Aircraft - Electric - Airplanes (FS/W) 4 Jul 06, 2006 05:46 PM
Video Multiplex FunJet - Full video (20 MB) Jeremy Z Electric Plane Talk 0 Jun 28, 2006 02:27 AM
Video Multiplex FunJET Indoor Jurgen Heilig Electric Plane Talk 2 May 01, 2006 07:31 AM