How To Instal Landing Gear with A Steerable Nose Wheel On the Kyosho T33? - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
May 10, 2001, 11:24 AM
Acme Powered!
Joe Elston's Avatar

How To Instal Landing Gear with A Steerable Nose Wheel On the Kyosho T33?

HI I know that some has installed fixed landing gear on their T33. Including a Steerable nose wheel. But I did an archive search and came up empty? Can anyone help me? All help is appreciated.
Thanks Joe
Sign up now
to remove ads between posts
May 10, 2001, 11:50 AM
EDF all the way!
bruff's Avatar
Check the e-zone articles. Robert Wagoner wrote one a couple of years ago One of the first EDF colunms also check his web page I thinks he has instructions there also. Here is the link.

[This message has been edited by bruff (edited 05-10-2001).]
May 10, 2001, 03:05 PM
Registered User
Instead of using one servo in the nose for the nose steering, I connect it direct to the alieron servo.
It works great & no extra servo or wieght!
Just have to get use to seering with the ailerons on the ground.
May 10, 2001, 10:18 PM
i followed roberts instructions and the conversion only added 1.5oz.
it's very cool taxiing back to the pits...gregg
May 10, 2001, 10:37 PM
Festina Lente
realdeal's Avatar
What wheels are pictured in that article. I may want to try the LG mod and those look just about perfect for the task.

May 10, 2001, 11:09 PM
i couldn't find those,so i used some dave brown lite flites 1 1/2" weight is around 5gr.pic's are on my site..........gregg

[This message has been edited by p471701 (edited 05-10-2001).]
May 10, 2001, 11:19 PM
Acme Powered!
Joe Elston's Avatar
I am using klett tailwheels, they are light and look like reall plane wheels with rubber tires and plastic rims. 1 inch diameter for the nose wheel and 1 1/2's for the mains, they look much cooler than the Dave Browns and weigh about the same.