New Products Flash Sale
Thread Tools
Old Jan 18, 2006, 10:42 AM
Safety Hawk is offline
Find More Posts by Safety Hawk
Here We Go!
Safety Hawk's Avatar
Discussion

Noob Question...Brace yourself!!


It's actually not that bad, I'm looking for a good, but inexpensive gyro to use in a Trex 450. Can anyone recommend one of these? I plan on getting a better one later on, but right now I just want something that will work.

Jay
Sign up now
to remove ads between posts
Old Jan 18, 2006, 11:17 AM
architorture is offline
Find More Posts by architorture
Registered User
I have this gyro and it seems to work pretty well. It has both heading hold and rate modes that are adjustable from an extra channel. If you dont have an extra channel it adjusts heading hold only with a screwdriver. I am also planning on getting a better gyro down the road when I can actually tell the difference. Also these guys are really helpful, bought all my stuff there: http://www4.mailordercentral.com/hel...?number=335093
Old Jan 18, 2006, 11:50 AM
hotairflyer is offline
Find More Posts by hotairflyer
No Dear its not a new one
hotairflyer's Avatar
A GWS PG-03 will work, I used one in my X-400. it is a rate gyro only not HH tho. You can get them for around $45.

I am upgrading my T-rex to GY401 from Ikarus Profi Heading Hold, if you want it you can have it for $50 shipped to you and I will pick up the paypal fees.

It works in rate or heading mode and I am taking it off my T-rex today, pm me if interested.
Old Jan 18, 2006, 01:22 PM
pfm is offline
pfm
Find More Posts by pfm
pfm
Patrick Mahoney
I am using the Align HH gyro that architorture mentioned. It works well for me as well. I'm not seeing a lot of drift - it's fairly lightweigh, makes transmitter set up really easy, and works as advertised. From my perspective as a relative newbie as well, I would encourage you to consider an HH gyro - they aren't that much more money - if you are going to spend $40+, why not spend $60-80 and get something much better - especially in light of the offer from hotairflyer.
Old Jan 18, 2006, 04:05 PM
polar bear_909 is offline
Find More Posts by polar bear_909
Registered User
I would recommend the futaba gy240 gyro. It is a heading hold gyro, though does not have remote gain. I have also heard that the jr 410 gyro is good for its price.
Old Jan 18, 2006, 04:09 PM
Wynn1427 is offline
Find More Posts by Wynn1427
Lesson Learned = $$ Saved
Wynn1427's Avatar
There is a word of advice that is given from time to time. Buy cheap and buy over . Just think of a Gyro malfunction and losing $$$ to repair the kit. Do it right the first time, it will reward you later .

Wynn
Old Jan 18, 2006, 11:36 PM
Safety Hawk is offline
Find More Posts by Safety Hawk
Here We Go!
Safety Hawk's Avatar
I agree with you Wynn, and I carefully choose the words "inexpensive" and "good" to describe what I'm looking for. I know it's difficult to find those two qualities at the same time with most things, and I'm willing to spend more if I have to. But occasionally things get made that are both good and inexpensive, and I was just trying to see if that was the case here. Anyhow, I think I might just go ahead and get the GY401 and be done with it. Thanks everyone.

Jay
Old Jan 18, 2006, 11:52 PM
architorture is offline
Find More Posts by architorture
Registered User
Now that the subject has come up, I mentioned I had the align HH gyro, but would I notice a difference going to the GY401? As of now I am only doing sport flying, but I am going to attempt some loops and rolls sometime in the near future. Does the GY401 require digital servos? Do I have to get the best digital servo available to tap the power of the 401?
Old Jan 19, 2006, 12:19 AM
Upside-Down is offline
Find More Posts by Upside-Down
Registered User
Upside-Down's Avatar
Don't go cheap, It will last forever in any heli you use (I think)


GY240 or GY401

Nuff said.
Old Jan 19, 2006, 12:29 AM
Safety Hawk is offline
Find More Posts by Safety Hawk
Here We Go!
Safety Hawk's Avatar
Quote:
Originally Posted by architorture
Now that the subject has come up, I mentioned I had the align HH gyro, but would I notice a difference going to the GY401? As of now I am only doing sport flying, but I am going to attempt some loops and rolls sometime in the near future. Does the GY401 require digital servos? Do I have to get the best digital servo available to tap the power of the 401?
From what I've read, it doesn't require a digital servo. There is a "DS" switch that enables the the digital servo compatibilty, but it is only compatible with Futaba digital servos. Now as far as to whether you'll notice a difference...I don't know, I'm a total Newby when it come to helicopters.
Old Jan 19, 2006, 12:34 AM
TheX is offline
Find More Posts by TheX
Old new guy
TheX's Avatar
The DS function is not limited to Futaba servos at all. The Airtronics and even the HDS877 micro digital work with it.
Old Jan 19, 2006, 12:46 AM
Safety Hawk is offline
Find More Posts by Safety Hawk
Here We Go!
Safety Hawk's Avatar
Hmm...thatís good to know. Like I said, I was just regurgitating some info that I read. On the Futaba site it says it will only work with Futaba digital servos....probably so they'll sell servos. I don't know.
Old Jan 19, 2006, 12:47 AM
Nick J is offline
Find More Posts by Nick J
Suspended Account
Fix or Repair Daily

FORD i hate fords to
Old Jan 19, 2006, 12:56 AM
Safety Hawk is offline
Find More Posts by Safety Hawk
Here We Go!
Safety Hawk's Avatar
Yep! But I'm referring to my inability to keep an aircraft flight worthy for longer than a days worth of flying.
Old Jan 19, 2006, 01:01 AM
Nick J is offline
Find More Posts by Nick J
Suspended Account
I also have the same problem


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Brace yourself.....Chinese Brushless is coming!!! Magna Electric Plane Talk 93 Aug 20, 2003 02:24 PM
Noob question: How to install a prop BoleyWv Parkflyers 22 Apr 15, 2003 07:30 PM
Covering noob question? 2 tone covering? Tres? Anyone? Double Dutch Parkflyers 8 Mar 14, 2003 01:32 AM
Noob question Huckebein Scratchbuilt Indoor and Micro Models 6 Mar 04, 2003 02:10 PM
foam cutting noob question johnny_carlos Foamies (Kits) 3 Jan 22, 2003 11:46 PM