Thread Tools
This thread is privately moderated by smsgill, who may elect to delete unwanted replies.
Jun 11, 2002, 01:22 PM
Trader Rating: 40
Scott Summersgill
smsgill's Avatar

FS: Todd's Models Tiny with motor/battery/servos/esc


Up for sale is a Todd's Models Tiny built from the laser cut kit. It only has 3 flights on it. It's a great flier but I need to finance another project. It is covered in Violet and yellow Ultracoat light. All up weight with the components listed below is 7.1 ounces. The battery has always been charged/discharged on a Dymond Supernova charger and it still takes 250 to 270 mah per charge. The battery pack has been used with another plane and has been cycled probably 25 times. All other components are like new and have only been used on this project. Included with the Tiny are the following:

3 x Cirrus CS-10BB servos
GWS R4P receiver, Hitec/Futaba shift on Channel 57
GWS DX-A Motor with heatsink
Jeti 05 ESC
One 8 cell 270 mah 1/3 AA NIMH battery pack

As you can see, it's ready to go. Price is $175 plus shipping. Does not include the Hitec Flash 5 shown in the photo. Payment via PayPal or Money Order. For best response please use the following email addresses:

daytime: ssummersgill@ostex.com
evenings/weekends: smsgill@attbi.com

To see my eBay seller rating go here http://cgi6.ebay.com/aw-cgi/eBayISAP...sort=2&rows=25

Later,
Scott
Sign up now
to remove ads between posts
Jun 11, 2002, 01:43 PM
Trader Rating: 32
Live to ride... and fly!
Tres Wright's Avatar
==3 x Cirrus CS-10BB servos ==

Kind of hard to tell in the pic, do you have it set up as a 4 channel or did you use 2 servos for the ailerons?
Jun 11, 2002, 01:45 PM
Trader Rating: 40
Scott Summersgill
smsgill's Avatar
It's set up as 4 channel. 1 servo for ailerons, elevator, and rudder each.

Scott
Jun 11, 2002, 02:02 PM
Trader Rating: 40
Scott Summersgill
smsgill's Avatar
Sold.
Last edited by smsgill; Jun 11, 2002 at 02:06 PM.

Thread Tools