Thread Tools
Old Nov 08, 2005, 12:44 AM
bmiller is offline
Find More Posts by bmiller
SoCal, Year Round Flying!
bmiller's Avatar
Quote:
Originally Posted by Paul DF jet man
if you want a smoke system how about these

http://www.hobby-lobby.com/atricks.htm
LOL! I'll have to put that on my T-Bird F-16!
also wouldn't mind dropping a bomb or 2!
Sign up now
to remove ads between posts
Old Nov 08, 2005, 12:51 AM
turbonut is online now
Find More Posts by turbonut
Pro Hoarder
turbonut's Avatar
Hey Guys, Plenty of room behind the canopy to adj cg. the problem is the height.but not a big prob.
Old Nov 08, 2005, 01:33 AM
bmiller is offline
Find More Posts by bmiller
SoCal, Year Round Flying!
bmiller's Avatar
Cool, with the bottom removed from the cockpit you should be good to go!
Didn't know you could slide it past the opening, On the F-86 the packs are centered under the 'pit w/ the electronics right behind them.
Old Nov 08, 2005, 02:19 AM
roccobro is offline
Find More Posts by roccobro
Watts your motivation
roccobro's Avatar
Paul- I had looked at those smoke packs and didn't even notice the "small" ones until now. That would be cool with one on a wing tip or as a drop tank. Not too much weight to worry about with this kind of power. Shoot the smaller smokes could be made into a motor cone extension to aid in fan dynamics and look like a burn out!

Scott- What is the max width and depth (into fuse)? These PQ packs are 4" long and 1" wide, 1 1/4" tall. I'm really tempted to order two more 2s 1320's. Grrr...

Justin
Old Nov 08, 2005, 03:01 AM
euromodels is offline
Find More Posts by euromodels
Registered User
Quote:
Originally Posted by mfranke
Justin
does the fan drop right in? This must be a different version of the MK2.
How long did it take you to get the fan from them. It also looks like their adapter is pre drilled out too?
Thanks
Mark
Hi,
We have the fans modified for Mega motors + 1/8" shaft adaptors in stock.
Regards,
Zdenek
Euromodels
Old Nov 08, 2005, 03:13 AM
roccobro is offline
Find More Posts by roccobro
Watts your motivation
roccobro's Avatar
There you go.

Justin
Old Nov 08, 2005, 10:32 AM
turbonut is online now
Find More Posts by turbonut
Pro Hoarder
turbonut's Avatar
Justin, I will check tonight!
S
Old Nov 08, 2005, 01:38 PM
monkamarm2000 is offline
Find More Posts by monkamarm2000
smug in granny panties
monkamarm2000's Avatar
Zdenek that is very cool!


Barry
Old Nov 08, 2005, 04:11 PM
Corey11c is offline
Find More Posts by Corey11c
AFM's fastest slow guy.
Corey11c's Avatar
I just got my Huck in from Hobby Lobby and I bought a Mega 16/15/3 and I'm gonna run a TP 4S1P 2100mAh pack. This is my first electric aircraft, so we'll see how it goes. Wish me luck.
Old Nov 08, 2005, 04:16 PM
Tumbler is online now
Find More Posts by Tumbler
Registered User
Tumbler's Avatar
Quote:
Originally Posted by Corey11c
I just got my Huck in from Hobby Lobby and I bought a Mega 16/15/3 and I'm gonna run a TP 4S1P 2100mAh pack. This is my first electric aircraft, so we'll see how it goes. Wish me luck.

Uh Oh, I could be wrong but I think you got the wrong motor. The 16-15-3 is for the Wemotec Minifan. I think you wanted the 16-7-3.
Old Nov 08, 2005, 04:25 PM
Corey11c is offline
Find More Posts by Corey11c
AFM's fastest slow guy.
Corey11c's Avatar
It's the same diameter as the 16/7/3, it's just a little longer casing. The 16/7/3 also wasn't in stock at my local hobby shop. If there's any problems I'll have other than the case length please let me know.
Last edited by Corey11c; Nov 08, 2005 at 04:46 PM.
Old Nov 08, 2005, 04:49 PM
power is offline
Find More Posts by power
Begin with end in mind...
power's Avatar
Quote:
Originally Posted by Corey11c
It's the same diameter as the 16/7/3, it's just a little longer casing. The 16/7/3 also wasn't in stock at my local hobby shop. If there's any problems I'll have other than the case length please let me know.
Also, how does the fan blade detach from the stock motor. I don't want to break it by prying on it.

As far as problems go there are none. Performance will be another issue the kv of the 16/15/3 is a lot lower than the 16/7/3 you will not see near the rpms from the 16/15/3 the weight is quite a little more as well

Mike
Old Nov 08, 2005, 04:50 PM
roccobro is offline
Find More Posts by roccobro
Watts your motivation
roccobro's Avatar
A couple things. First, there is no stock motor. The rotor, fan housing and adapter are loose in a box. so no problems there.

Second as Power points out, the 16/15/3 has a kv (rpm per volt) of 3000 and while the weight won't effect you too much (7grams heavier than the Himax), you'll need some serious batteries (5s minimum) to get up to the rpms to match the 16/7/3 is spinning at on 3s with a kv of 5580. I'm interested to hear how she does. The 16/15/3 is a great motor for alot of applications. The /2 would be better for this one if you want to stay with that motor size.

To anybody with the F-86 or mig, what is the battery box size? Somebody said a 4s 1320 won't fit. I want this information so others can choose the proper batteries (besides the TP 1320's ) and not get bummed.

Justin
Old Nov 08, 2005, 08:12 PM
AirX is offline
Find More Posts by AirX
EDF rules... :)
AirX's Avatar
The first Hucks had Speed 300's in them or the BL CZ motors IIRC.

Eric B.
Old Nov 08, 2005, 09:31 PM
Corey11c is offline
Find More Posts by Corey11c
AFM's fastest slow guy.
Corey11c's Avatar
Well, I'm working on making the motor fit in the housing right now. A little more machining and it will be done. I'll let you guys know how it does with the 16/15/3 on 4s1P


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale For Sale - FS - GWS 350 Motor / Power System - D Geared - Prop, Spinner, Deans inc. freedomflyer Aircraft - Electric - Power Systems (FS/W) 1 Jun 26, 2006 04:25 PM
For Sale FS - GWS 350 Motor / Power System - D Geared - Prop, Spinner, Deans included! freedomflyer Aircraft - Electric - Power Systems (FS/W) 1 Jun 09, 2006 05:16 PM
Discussion Alternate airframe for Alfa Mig fan/motor?? gambit7 Electric Ducted Fan Jet Talk 5 Feb 21, 2006 05:29 PM
Hobbico Press release - Ultrafly D/13/32 Brushless Motor Power Upgrade Kit Dave Lauck Product Announcements 0 Sep 28, 2005 04:01 PM
hyperion motor and Alfa fan? andre petit Electric Ducted Fan Jet Talk 0 May 12, 2005 05:59 PM