If the servo of the bottom wing I think when landing will be broken

My second superbandit, this built friend of mine for me, is 100% scale version covered by self-adhesive foil . Power setup Turnigy 2826-6 (2200kv) with balanced APC 6x4 E prop, ESC Hobbyking 40A/5A BEC , servos 2 x Corona 929MG on ailerons and NONAME 12g MG servo on elevator, battery Turnigy HeavyDuty series 3s 2200 mAh 60C (200g with glued welcro). RTF Weight 680g. I need do some stickers and will be ready for maiden flight.

hello friends !! .... I'm from the south of Spain and I decided to build my first superband with 64mm edf FMS at 109% and change the material ... I will not use foam board and I prefer 3mm corex ... something heavier but a good durable material ...... some construction guide for this nice bird? ... I hope the whysky friend appears around here...
I do not know if corex 3mm is not enough for the wing, even if you insert a carbon rod ... maybe something thicker material or double stick

I hope any help during its construction ... thanks

Mine has the same power plan edf 64mm, plane made from 6mm floor foam plates, but the wings are made from 3mm plates all model is laminated. Now it's
not completely assembled, hope will fly well.

That look great!

Thanks.
Finally had mine maiden flight!����
Seems so fast, but I guess will make it. It is my first EDF, so impresseions are too many ��

My Super Bandit 820mm wing span. Lights controlled by Arduino board, pusher jet.

Ultra BANDIT, RC model letadla (1 min 33 sec)

Your Bandit looks nice and appears to fly nice too!
I'm looking at building one and using a 12 blade 70mm EDF.
Would I need to increase the size of the plane to suit the 70 MM fan? Or would the 32 inch wing span be OK?

Originally Posted by yeah74

My Super Bandit 820mm wing span. Lights controlled by Arduino board, pusher jet.]

Glen