Thread Tools
Old Sep 22, 2008, 10:05 PM
circletree is offline
Find More Posts by circletree
Registered User
circletree's Avatar
i have one left, NIB. mine is the electric f/f one. i tried converting one to r/c last year, put the guts out of one of the airhogs reflex coaxial choppers in it, rudder and throttle only. it was a sweet little flyer, but the ESC could not handle the amp draw of the stock motor/prop combo. i flew it around at half throttle and it was very pretty in the air. thinking about putting the parkzone micro cessna brick in the last one, not sure if the cessna motor/gear reducer will fly it, though.
Sign up now
to remove ads between posts
Old Sep 22, 2008, 10:13 PM
mr badwrench is offline
Find More Posts by mr badwrench
Registered User
mr badwrench's Avatar
It should fly but not as nice as some otehr ones here... spend some extra dough and get some decent electronics.
Old Sep 23, 2008, 12:51 AM
Janusz Jawien is offline
Find More Posts by Janusz Jawien
Registered User
Janusz Jawien's Avatar
Parkzone Cessna guts are much too wimpy! The Acrobipe airframe only is about 1 oz.
This airframe flies great even loaded to 5.5oz and there is no need to be very concern about the weight... it handles winds much better when heavy...
On the pic you have little Acro with bigger brother... Christen Eagle by Cox painted in Oracle plumage. Both are great fliers...
Janusz
Old Nov 28, 2008, 12:56 PM
peperry is offline
Find More Posts by peperry
RC Junkie
peperry's Avatar
I figured I'd bump this thread since I'm starting on another Acro Bipe build. I bought 5 of them from harbor freight at something like $4 a piece. They are awesome little planes, and handle wind great if built a little on the heavy side.

Here's mine from last year:



GWS 50 XC with 3x2 prop
CC Pixie 7 ESC
GWS pico receiver.
300mah lipo
cheapo 3.7gr servos.

Rudder + Elevator only.

Maiden flight on a windy day:
Harbor freight acro bipe RC conversion. (0 min 41 sec)
Old Nov 28, 2008, 01:52 PM
Headspin is offline
Find More Posts by Headspin
It wasn't my fault!!
Headspin's Avatar
haha.. I got mine on the bench.. ready to move my gear from one that got stuck in a tree.. I had to throw sticks to get it back and it didn't fair too well!

Which harbor freight?? is it a black friday special? I checked the ads and didn't see any offered for our branch
(Saginaw MI)
Old Nov 28, 2008, 02:55 PM
peperry is offline
Find More Posts by peperry
RC Junkie
peperry's Avatar
Quote:
Originally Posted by Headspin
haha.. I got mine on the bench.. ready to move my gear from one that got stuck in a tree.. I had to throw sticks to get it back and it didn't fair too well!

Which harbor freight?? is it a black friday special? I checked the ads and didn't see any offered for our branch
(Saginaw MI)
Sorry, I meant to say that I picked up 5 last year. They are NLA at harbor freight
Old Nov 28, 2008, 02:58 PM
Headspin is offline
Find More Posts by Headspin
It wasn't my fault!!
Headspin's Avatar
*lol* I was scanning the black friday lists..
I didn't see any.. They were 5 bucks last year here too and I only got one as I didn't hold much hope of it working out to be honest..

I'f only I had known!!
Old Nov 28, 2008, 03:06 PM
peperry is offline
Find More Posts by peperry
RC Junkie
peperry's Avatar
Yeah I picked up only one initially before knowing anything about them, then realized that it was a pretty capable little airframe for the price. The next day I stumbled across this great thread and realized that the HF plane was the same as the funcraft acro bipe, so I immediately ran out and bought all 5 in the store.

Once I run out of acro bipes, I'm going to try to build a scaled up version of the foam micro ultimate.
Old Nov 28, 2008, 03:10 PM
Headspin is offline
Find More Posts by Headspin
It wasn't my fault!!
Headspin's Avatar
It's a little better too.. in my opinion..
Old Nov 29, 2008, 12:46 AM
helipilot is offline
Find More Posts by helipilot
Clear for Take-Off!!!
I picked up a few form the local Harbour Freight store over the summer. Paid $7.50 ea for mine. I noticed the tail feathers and wings were not the same dimensions to each other. This would explain why me version 2 flies a bit faster than my version 1. Still a great plane to fly.
Old Nov 30, 2008, 11:52 AM
MustangAce17 is offline
Find More Posts by MustangAce17
3d and EDF, some scale
MustangAce17's Avatar
hey guys, just worked on my latest one last night,a project I've been thinking about for months and finally did. The Acro Tripe
Old Nov 30, 2008, 03:29 PM
mthomas is offline
Find More Posts by mthomas
Hi I am Mark & I am an addict
mthomas's Avatar
Hey all.... Anyone know where more of these can be found?
Old Nov 30, 2008, 06:31 PM
GBX is offline
GBX
Find More Posts by GBX
GBX
Registered User
I went to HF today but no luck
Really wanted to make a all red oracle challenger
Old Nov 30, 2008, 10:09 PM
foxsavage is offline
Find More Posts by foxsavage
Registered User
foxsavage's Avatar
"Hey all.... Anyone know where more of these can be found?"
I got some of them here,
http://www.ubhobbies.com/displayroom...l?catuid=14722
Old Feb 07, 2009, 12:55 AM
Hawker007 is offline
Find More Posts by Hawker007
Registered User
Where's the cg on these little gems located??
Thanks


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Acro Bipe and RFFS-100 dhurd Scratchbuilt Indoor and Micro Models 89 Jun 03, 2003 06:26 AM
Fyi about Acro Bipe and Viper. Wilber Scratchbuilt Indoor and Micro Models 6 Apr 26, 2002 05:34 PM
Acro-Bipe (Firefly-powered) Greg Covey Scratchbuilt Indoor and Micro Models 24 Apr 10, 2002 01:56 AM
Acro Bipe Wilber Scratchbuilt Indoor and Micro Models 7 Apr 05, 2002 02:47 PM
Store of Wonder Acro Bipe? Acer Scratchbuilt Indoor and Micro Models 9 Apr 04, 2002 11:08 AM