Shop our Airplanes Products Drone Products Sales
Thread Tools
Old May 05, 2008, 10:18 PM
Headspin is offline
Find More Posts by Headspin
It wasn't my fault!!
Headspin's Avatar
Quote:
Originally Posted by Janusz Jawien
Just after maiden the new airframe... flew gread, like the old one, no trim necessary.
On those pics the generous right and up motor thrust is well visible.
The oryginal prop was used just for the pics, was flown with 3x3 GWS black prop.
Nice place fro the Rx..

I stuck mine underneath the fuse.. maybe one day I'll make a little cowl for it like the original had..
Sign up now
to remove ads between posts
Old May 05, 2008, 10:34 PM
Headspin is offline
Find More Posts by Headspin
It wasn't my fault!!
Headspin's Avatar
Quote:
Originally Posted by foxsavage

15.50 is a bit steep.. How much was shipping.. and does he take PayPal?

I didn't fancy filling in all that to find out shipping is 10 bucks or something..

Should be free for that

Good find though....
Old May 05, 2008, 11:18 PM
foxsavage is offline
Find More Posts by foxsavage
Registered User
foxsavage's Avatar
Shipping was $5, I paid by credit card
Old May 16, 2008, 10:43 AM
Headspin is offline
Find More Posts by Headspin
It wasn't my fault!!
Headspin's Avatar
Yayy.. I ordered one.. these are cool.
Old May 16, 2008, 11:00 AM
termite is offline
Find More Posts by termite
Suspended Account
I've gotten several of the FunCraft from UB Hobbies and think they are a GREAT value!

Thay all fly awsome
Randy
Old May 23, 2008, 01:08 AM
foxsavage is offline
Find More Posts by foxsavage
Registered User
foxsavage's Avatar
Here's a video of my dog chasing the Acro-Bipe
https://www.rcgroups.com/forums/show...30#post9812436
Old May 23, 2008, 08:55 AM
Janusz Jawien is offline
Find More Posts by Janusz Jawien
Registered User
Janusz Jawien's Avatar
Congrads Fox!

Looks like you and your puppy have fun things to do in this paradise of yours!

Janusz
Old May 27, 2008, 12:56 PM
massimo is offline
Find More Posts by massimo
Registered User
massimo's Avatar

post here setup and flight time .


hi to all ,
please write here your configuration/setup(motor ,battery ,prop,esc,servo) and your flight time.
I appreciate this very.
Thank you in advance .
Last edited by massimo; May 27, 2008 at 01:01 PM.
Old May 27, 2008, 02:51 PM
mr badwrench is offline
Find More Posts by mr badwrench
Registered User
mr badwrench's Avatar
4x2.5 gws prop 4200kv 12x30 himax inrunner 480 mah 2 kokam 2 gws pico servos I get 2 7min flights from a charge usually unless its windy.
Old May 27, 2008, 11:59 PM
foxsavage is offline
Find More Posts by foxsavage
Registered User
foxsavage's Avatar
Mighty Midget 13/4/15T with a YGE-4, an AR6300, a 2 cell 250mah full river and 2, 2.5 gram servos I get 10 minutes or more, it flies great in the wind too
Old May 28, 2008, 08:20 PM
Headspin is offline
Find More Posts by Headspin
It wasn't my fault!!
Headspin's Avatar
GWS IPS-50 brushed motor with GWS 3x2 prop
Blue Arrow PP 10B esc
2 x Blue Arrow 3.6g servo's (Rudder + Elevator)
6 ch Blue Arrow R3P5-H/T II Rx
And a Poly-Quest 2 Cell 300 mAh lippo
And lots of 5 min epoxy

Flight time is 15 mins minimum.. probably more but I'm being conservative I never timed it in a continous flight to be honest

Time flys when your having fun..

Awesome.. totally Awesome.. I just took her out and had a continous flight of 15 minutes. I had to stop as it was just getting too dark. I admit I was only at half throttle most of the time (didn't really need more) with the odd burst for loops and stuff. On landing (grass too long so "flipover" landing.. no damage) I checked everything and nothing was hot.. motor was a little warm but that's it.

I have been wondering about a 700mAh battery but I'm thinking two 300's will do as I love the way this flies.
Last edited by Headspin; May 28, 2008 at 09:20 PM.
Old May 29, 2008, 01:08 AM
massimo is offline
Find More Posts by massimo
Registered User
massimo's Avatar
mr badwrench
foxsavage
Headspin

ˇˇˇThank you!!!
Old Aug 06, 2008, 01:43 PM
massimo is offline
Find More Posts by massimo
Registered User
massimo's Avatar
hi to all ,

Hacker - E10 28L
14 g
Ř 12x30 mm
rpm 5500
5-7A
shaft Ř 1,5 mm




Ph.10 esc
2 lypo FlightPower Evo V2 20c,350mAh
this could be a good choice?



Council for propeller? 4x2,5 or 3x2 or 3x3 ?

I appreciate your advice.

Regards
Old Aug 06, 2008, 02:39 PM
mr badwrench is offline
Find More Posts by mr badwrench
Registered User
mr badwrench's Avatar
6100kv? thats gonan be one FAST acrobipe.... id look for a slightly bigger battery.
Old Aug 06, 2008, 03:01 PM
massimo is offline
Find More Posts by massimo
Registered User
massimo's Avatar
5500 Kv
http://www.hackermotor.de/images/Cat...8-WEB%2040.pdf


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Acro Bipe and RFFS-100 dhurd Scratchbuilt Indoor and Micro Models 89 Jun 03, 2003 06:26 AM
Fyi about Acro Bipe and Viper. Wilber Scratchbuilt Indoor and Micro Models 6 Apr 26, 2002 05:34 PM
Acro-Bipe (Firefly-powered) Greg Covey Scratchbuilt Indoor and Micro Models 24 Apr 10, 2002 01:56 AM
Acro Bipe Wilber Scratchbuilt Indoor and Micro Models 7 Apr 05, 2002 02:47 PM
Store of Wonder Acro Bipe? Acer Scratchbuilt Indoor and Micro Models 9 Apr 04, 2002 11:08 AM