hacker 20 motor mount and prop mount - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 21, 2005, 09:46 AM
Registered User

hacker 20 motor mount and prop mount

Would someone please guide me to where I can learn about how to mount a hacker 20-22 on a plane with a stick mount (Fancy Foam Edge)? I would also like to learn about options for mounting props with the various adaptors provided with the motor. Is there some way to mount GWS 1047sf props? I have all of this new stuff and not a word about how to use it correctly. I have been using a Himax 2015-4100 with gearbox and stick mount.
Sign up now
to remove ads between posts
Oct 21, 2005, 10:26 AM
Registered User
guyaneze's Avatar
hola senor,
ju need to git u one of these pardner:


eet weell mount your hacker a20 on a gws stick perfectly....stephens aero isn't the only one that carries em...look around....I googled and found that....i picked one up at a funfly earlier this year....its made by hacker or distributed by the hacker usa peeps....so wherever u got your motor they should be able to get em.

mounting gws 1047 props....ouch ouch...use an apc prop till i find ya an answer....how i did it?....i bought a prop saver....

well...i can't remember where i got it...but u can get one from balsapr...
like this....


get one to match the shaft diameter of your motor....i think its 3mm...but don't take my word for it.

this is a list of what balsapr has...

himaxx makes one...and hyperion makes on....other manufacturers might also make em....

enjoy the weekend...stay out of wilma's path.
Oct 21, 2005, 12:33 PM
Registered User
Dr Kiwi's Avatar
Is that a geared B20 or an outrunner A-20?

Top Creations has several stick mounts available.
Oct 21, 2005, 12:52 PM
Registered User

a20-22 mount

It is the A20-22L model. I got it for another application but thought I would like to try it out on a plane I have ready to go. The plane is a Fancy Foam Edge, 15 oz.
Oct 21, 2005, 12:55 PM
Registered User
Dr Kiwi's Avatar
Then the "small AXI 22xx mount" from www.topcreationsrc.com will be fine.
Oct 23, 2005, 06:44 PM
Ignint McNugget
Rumple's Avatar
The Cobri rotating case mount from http://www.e-flightline.com/ would also fit and would put the motor below the stick (in the same position your Himax was in). This may shift your thrust line down slightly, not sure if that matters.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Hacker B20 Motor Mount Ralph A. D'Amelio Power Systems 10 Feb 28, 2008 10:23 AM
For Sale Himax 20-25-3200 motor, spinner, prop, mount Ebolavoodoo Aircraft - Electric - Power Systems (FS/W) 0 Jul 27, 2007 11:12 PM
For Sale AXI 4130/20 Jeti ESC, motor mount, prop mounting kit be69ar Aircraft - Electric - Power Systems (FS/W) 7 Jul 23, 2007 02:11 PM
Help! Wanted-Hacker A30 motor mount and prop mount Fred Bronk Electric Heli Talk 2 May 16, 2007 12:47 PM
M-20 and N-20 Motor/Gearbox/Prop Test Results cybermike Scratchbuilt Indoor and Micro Models 27 Jul 30, 2003 12:03 PM