Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 17, 2005, 01:24 PM
mrebman is offline
Find More Posts by mrebman
Registered User

Is it OK to charge an 1800 MaH Lipo at 2 Amps??


Is it OK to charge a Polyquest 1800-2S Lipo pack at 2 Amps (2000 MaH)??
My charger has a setting for 1.5 Amp & 2.0 Amp, since the pack is rated at 1800 Mah, I am thinking I can get away with charging at 2 Amp, am I correct or am I going to let the smoke out??

-Thanks-

Mike
Sign up now
to remove ads between posts
Old Oct 17, 2005, 01:32 PM
fly_boy99 is offline
Find More Posts by fly_boy99
Flying motor mount master
fly_boy99's Avatar
Mike-

I think you are better off using the 1.5A charge rate as overcharging can dimish a packs ability to deliver. Besides most advocate at charging at .8C to elongate your packs life which turns out to be roughly 1.5A charge rate(1.4 actually).

fb


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Can I charge a 2100 mAh LIPO at less than a 1C rate? Armchair Bronco Batteries and Chargers 7 Sep 07, 2005 04:31 AM
Sold THUNDER POWER 2S2P Lite 4000 mAh lipo - x 2 NEW punkindrublik Aircraft - Electric - Airplanes (FS/W) 11 Jul 02, 2005 04:00 AM
Charging 4200 tp at 2 amps Fordplay Batteries and Chargers 10 Jun 17, 2005 12:05 PM
Is 22 AWG (0.711mm) wire suitable for an IPS DD motor at 2 amps? stu78 Power Systems 3 May 12, 2005 10:21 AM
Is it OK to charge a 7x270AA battery pack at 2 amps? Ryan Nau Power Systems 7 May 11, 2001 09:57 AM