Thread Tools
Old Sep 30, 2005, 10:30 PM
bluezephyr is offline
Find More Posts by bluezephyr
Registered User

Dumas 1954 36' Commander Express Cruiser (build)


Hello boat builders. Have I got a good one for you.

I'm gonna attempt to start my first thread for building. I hope to learn more about posting by doing this. And gain more friends in the boat field. I have built quite a few boats from abs, fiberglass, to wood. I just finished the 1949 dumas racer. I got so frustrated at times but knew when to put it down. Looking at the model and back I would do it again. Oh I guess I am. As always i hope that my boats turn out to be half as nice as Pat's. I build a little slower so this build could go into spring. If I'm Lucky. haha.

Well lets look inside. Oh I love smell of a new wood kit. MM Good.
Sign up now
to remove ads between posts
Old Oct 01, 2005, 12:01 AM
Kmot is online now
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
I'll be watching!
Old Oct 01, 2005, 01:05 AM
MILLERTIME is offline
Find More Posts by MILLERTIME
Taking care of the pond.
MILLERTIME's Avatar
Borrow some of Pat's elve's!!!
Old Oct 01, 2005, 11:07 AM
bluezephyr is offline
Find More Posts by bluezephyr
Registered User
All most forgot the goodies. Here is some pics of the hardware from MACK products. I ordered package 419 and purchased the 5045 12 volt motors, Octura 937/3 R&L props, and 1/8 drive-dogs seperately. You pay twice the price as you would with the Dumas package but don't let that stop you. The stuff from MACK is WAY nicer than the package from Dumas. However this is only my opinion.
Old Oct 02, 2005, 11:34 AM
H.Lauer is offline
Find More Posts by H.Lauer
Registered User
H.Lauer's Avatar
Bluezephyr;

I'm looking forward to your build.Mack's stuff is top self,Rich is quite a character.The Commander builds into a really nice looking &running boat.Good luck-Harry
Old Oct 02, 2005, 06:30 PM
Aerominded is offline
Find More Posts by Aerominded
Registered User
Great! I'll be watching too! Have fun!
Old Oct 04, 2005, 07:14 PM
GSL is offline
GSL
Find More Posts by GSL
GSL
Graham

CC Commander


Glad someone else is building one of these. I just ordered mine today, this will be my first boat as I have been building RC Aircraft for a few years now.

I am looking forward to building this model and will be watching this thread as you progress.

Graham
Last edited by GSL; Oct 04, 2005 at 08:55 PM.
Old Oct 06, 2005, 10:13 PM
bluezephyr is offline
Find More Posts by bluezephyr
Registered User

well its a start!!!


Finally got started .I assembled the two keel parts and the deck parts. I screwed them to the building board to be sure every thing is straight and true. I'm using Elmers wood glue for this part. I must say though I hate the die crunched parts for the hull. The cabin parts are laser cut so why oh why can't they do the whole kit laser cut? The wood supplied is very good other than the cutting. over all I'm happy. .
Old Oct 06, 2005, 10:37 PM
Aerominded is offline
Find More Posts by Aerominded
Registered User
All right!
Old Oct 13, 2005, 09:39 AM
bluezephyr is offline
Find More Posts by bluezephyr
Registered User

Framing the keel and sheer.


Here is the keel and sheer framed up with the bulkheads. Dispite the bad die cutting the parts fit is very good. I did have to shim a few places with 1/32" bass wood in a couple of places. The next step will be to glue the hard chines on and fair the bulk heads. Although I keep talking of the die cutting dont get wrong there is definatly worse out there. Ok enough bashing of that subject and lets emjoy the build. Here we go.
Old Oct 13, 2005, 11:50 AM
Kmot is online now
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
Wow, this is very interesting to watch! Seeing how you set it up for gluing and use shot bags as weight.

BTW, I see a shovel in the background!
Old Oct 13, 2005, 06:35 PM
bluezephyr is offline
Find More Posts by bluezephyr
Registered User

Kmot


Yeah the shovel nose is from the plans in rc boat modeler magazine. A friend and I are trying to get a spec class of those. It build real fast I can cut one out and assemble it in one day, about 8 hours or less. However it takes a lot longer to fiberglass it.
Old Oct 13, 2005, 09:16 PM
GSL is offline
GSL
Find More Posts by GSL
GSL
Graham

CC Commander


Looks great so far bluezephyr. I just received my kit this week, set up to start and the only Die Cut part missing was DC 5 sheets with the sheer parts. Now I have to wait till they send me the parts.

I will learn as I watch your progress.

Graham
Old Oct 22, 2005, 11:42 PM
P. Tritle is offline
Find More Posts by P. Tritle
Registered User
P. Tritle's Avatar
Blue, Lookin' good! Will be following this one with interest. I love these old cabin cruisers.
PAT
Old Oct 23, 2005, 12:04 AM
Kmot is online now
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
Quote:
Originally Posted by bluezephyr
I can cut one out and assemble it in one day, about 8 hours or less. .
Holy moly!!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Dumas C-C Commander Builders? Aerominded Scale Boats 11 Oct 29, 2016 11:46 AM
Dumas Trojan F-31 Cruiser (build) empirebuilder Scale Boats 125 Sep 16, 2016 02:39 PM
Dumas Northrop Alpha R/C conversion build: intro mu2freighter Parkflyers 64 Oct 21, 2014 05:47 PM
LEG 36" P51D Mustang build legliderman Slope 105 Feb 17, 2006 06:32 PM