Thread Tools
Old Sep 16, 2005, 03:19 PM
GalantVR4 is offline
Find More Posts by GalantVR4
Electric Relaxation
GalantVR4's Avatar

My SA CAP 232


I just wanted to post a pic of my new Stevens Aero CAP 232. I have been flying it for 2 days and it's just awsome. This was my first SA plane, but not the last. The kit was missing a few parts when I opened the box. I contacted SA and they shipped the parts out that day free of charge. The build was pretty easy though I did mess up a couple of times. My heavy hands broke a few parts during the build, but nothing major. I am running a Himax 2812-0850 on a TP1320 3cell lipo. My AUW is right at 16oz. The plane flies very smooth and the rolls are nice and clean. Landing is a breeze with this plane. I just cut power and it settles in nice and smooth. During stalls the nose just drops a little and recovers once some speed has built up. I have not been able to knife edge but i dont think I have enough rudder travel. Inverted flight is very easy. I have my CG set at the factory specs and it is a little nose heavy. I plan to move the battery back a little on the next flight. This should make inverted flight even better. does anyone know if moving my CG back will also help with knife edges, or is the Cap just not a good plane for that? Is anyone else flying this plane? If so please post your comments or tips.

Thanks
Regan
Last edited by GalantVR4; Sep 16, 2005 at 05:11 PM.
Sign up now
to remove ads between posts
Old Sep 16, 2005, 05:14 PM
rcdrum is offline
Find More Posts by rcdrum
Registered User
rcdrum's Avatar
Looks cool! What prop are you using on the Himax?
RC
Old Sep 16, 2005, 05:49 PM
citabria is offline
Find More Posts by citabria
Under tension
citabria's Avatar
That's the nicest covering scheme I've seen on a CAP232 in quite a white. Nice job!
Old Sep 16, 2005, 05:51 PM
GalantVR4 is offline
Find More Posts by GalantVR4
Electric Relaxation
GalantVR4's Avatar
Thanks RC. I am using an APC 9x7 prop. I did try an APC 10x7 prop today and I got better vertical performance. I was told that the 10x7 might be too much with my motor and batteries tough. My batteries did get warm with the 10x7 so I will probably switch back to the 9x7. Wow thanks for the nice comment Citabria!
Old Sep 16, 2005, 10:45 PM
GalantVR4 is offline
Find More Posts by GalantVR4
Electric Relaxation
GalantVR4's Avatar
And this is what she looks like after a bird (goose) strike on a high speed pass. Plane was totaled and the bird was hurt.
Old Sep 16, 2005, 11:06 PM
Kyle G. is offline
Find More Posts by Kyle G.
Registered User
Kyle G.'s Avatar
Ouch man! Looks repairable. Don't give up on it. It looked like a great plane! All that hard work for a stupid goose... They're overpopulated anyways. Sorry to see that on the first few flights. Get'er back flying!
Old Sep 16, 2005, 11:09 PM
GalantVR4 is offline
Find More Posts by GalantVR4
Electric Relaxation
GalantVR4's Avatar
Kyle it only looks like that because the covering is holding it together. The fuse is crushed along with most of the wings. A good deal of the plane is still at the field. I might get a G-Ride next. 2 of my HS55's and my receiver are gone also.
Old Sep 17, 2005, 10:28 AM
Griffin is offline
Find More Posts by Griffin
WAA-08 Survivor
Griffin's Avatar
Yeah, thats not repairable. But what about reusing tailfeathers, canopy, wheel pants, tailwheel, ailerons etc on a new cap kit? Of course, it might be more fun to do something new with covering or even try the G-Ride . Sorry about your crash. Steve
Old Sep 17, 2005, 04:46 PM
Mrs_SA is offline
Find More Posts by Mrs_SA
Registered User
Regan ~ The palne was beautiful! You did an awesome job on the covering! I am sorry to see the goose got it! Looks painful

~ Rachel Stevens
Stevens AeroModel
Old Sep 17, 2005, 05:27 PM
GalantVR4 is offline
Find More Posts by GalantVR4
Electric Relaxation
GalantVR4's Avatar
Griffin everything is gone but the canopy and the wheel pants. Thanks Rachel! You guys did a great job on the design. It was a very nice flying plane. Im going to go ahead and build the G-ride once I get some money.
Old Sep 17, 2005, 07:51 PM
Mrs_SA is offline
Find More Posts by Mrs_SA
Registered User
Regan ~ Thanks for the compliment Bill is 100% the plane designer - I am just his helper I admire his handy work as well

~ Rachel


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Building a SA CAP 232 - my first kit and build mrm1 Beginner Training Area (Aircraft-Electric) 242 Nov 14, 2008 10:18 PM
My SA Cap 232 S300 Build Desertraptor Parkflyers 31 Jul 08, 2005 10:02 AM
Got my SA CAP 232 today! EKI16 Parkflyers 5 Mar 16, 2004 08:17 AM
Which GWS system is best for the SA Cap 232 Speedfreak Parkflyers 0 Jan 31, 2003 06:01 PM
My Wattage Cap 232 problems solved Billmagann Sport Planes 4 Aug 29, 2002 10:48 PM