to grease or not to grease - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Sep 07, 2005, 07:03 PM
Registered User

to grease or not to grease

i am in the process of replacing the oneway bearing in the main gear, should i grease it or not and if so what sort of grease. of even oil?
Last edited by Garry Reinhold; Sep 07, 2005 at 11:18 PM.
Sign up now
to remove ads between posts
Sep 08, 2005, 12:49 AM
Registered User
tippy's Avatar
The "greaser" from Heliproz.

The "grease" from Heliproz. (EP grease)

Sep 08, 2005, 03:12 PM
Multi-Platform Pilot
barracudahockey's Avatar
The one way, or auto hub isn't a bearing its a torrington clutch. Clean all the grease you can out of it. Coat everything with a light coat of tri-flo or atf (tranny fluid)

Drip some tri flo down onto it once in a while and it should be fine.

Also if its a Raptor, don't over tighten the lower jesus bolt, that will distort the gear and make the auto hub lock up.
Sep 08, 2005, 06:04 PM
Registered User
thanks guys that is a lot of help

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
To grease or Not to grease One Way Bearing??? Hovertime Electric Heli Talk 21 Oct 25, 2008 10:23 PM
Do you guys grease or oil the motors and gearboxes? motoadve Electric Plane Talk 6 May 23, 2005 01:12 PM
gear drive or not? sms Parkflyers 4 Jul 12, 2001 03:11 PM
Speed 280BB - direct drive or not? Tyson Electric Plane Talk 9 Jun 04, 2001 07:12 AM
P-40 Warhawk FLY or NOT Cosmic Shane Parkflyers 0 May 17, 2001 01:54 AM