Shop our Airplanes Products Drone Products Sales
Thread Tools
Sep 03, 2005, 02:21 AM
Registered User

Some help needed on finding airplane model


Hello, Im trying to find the following models with no luck.
.Bristol Bulldog IIA
.Morane Saulnier MS230
.Dewotine D26
.SOPWITH SNIPE

If anyone now a manufactor that make them please advise. Im not interested on plans but on kits.
Sign up now
to remove ads between posts
Sep 03, 2005, 01:54 PM
Registered User
skylane42's Avatar
I don`t think anyone ever produced a kit of these planes.. but you might be able to find plans and scratch build one.. Check with some of the bigger plans suppliers like John Ponds Plans Service.
Sep 03, 2005, 03:17 PM
Registered User
tailskid2's Avatar
Were any of them kits? The names sure don't sound familiar.

Jerry
Sep 05, 2005, 05:53 AM
Registered User
And what about a 1/4 sopwith camel. Is there any kit been produced. Probably I can convert it on the sopwith snipe
Sep 08, 2005, 08:06 PM
OCD: Old, Cranky and Disgusted
challenger_i's Avatar
Quote:
Originally Posted by helderluiss
And what about a 1/4 sopwith camel. Is there any kit been produced. Probably I can convert it on the sopwith snipe
It would take a great deal of modification to change a Camel to a Snipe.

Model Airplane News (Air Age) has a really good set of drawings for the Snipe. Would be simpler to use these drawings to make a set of Snipe plans.

SAM's, in Britain, sells a kit for the Bulldog fighter. Also, I know a gentlman that sells the Harold Osbourne MS-230 plans. PM me, for his address, if you like.
Sep 08, 2005, 09:09 PM
Registered User
AmpAce's Avatar
Dare Design has a Moraine Saulnier, don't know if it is the right model though. Here's a link to their site. http://www.darehobby.com/index.htm

AmpAce
Sep 08, 2005, 09:55 PM
OCD: Old, Cranky and Disgusted
challenger_i's Avatar
The Dare kit is the MS-29/A-1. Still, a NICE looking bird!
Sep 09, 2005, 02:50 AM
Registered User
Thanks for your answers.
Challenger, can you tell me how to find Sams.

Thanks
Sep 09, 2005, 05:27 AM
Registered User
Kiwi's Avatar
R/C Scale Aircraft had the Snipe as a free pull out plan Dec91/Jan 92 . 62" span for a .40-.60. Do Nexus sell their plans now?
I have plans for an 18" rubber powered Bulldog,(Comet kit)
Sep 09, 2005, 06:03 AM
Registered User
I was thinking on 1/6 or 1/4 scale.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Some help needed finding constr. article sinbad Scratchbuilt Indoor and Micro Models 2 May 25, 2006 12:36 PM
Some help needed pls on GWS Zero leesops Parkflyers 12 Dec 07, 2003 12:20 PM
help needed on CG for flying wing model bronco Power Systems 5 Apr 24, 2002 08:12 AM
Info/Help needed on Promax cobalt or equivalent? Magna Electric Plane Talk 2 Jan 13, 2002 06:55 AM
Help needed on controlable battery dumper Ken Lapointe Power Systems 13 Dec 13, 2001 03:04 PM