Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Aug 25, 2005, 02:37 AM
randall1959 is offline
Find More Posts by randall1959
Suspended Account

Can anyone tell me about this?


Will this power my Wing Dragon? I want to put a camera on it but I'm not very well versed on these electric thingies, haha.
http://cgi.ebay.com/Combo-Brushless-...QQcmdZViewItem
Sign up now
to remove ads between posts
Old Aug 25, 2005, 03:35 AM
randall1959 is offline
Find More Posts by randall1959
Suspended Account
I got this one instead. I'm hoping it will have more power than the old speed 400 motor and 7X4 prop.
It comes with a 30 amp controller and 10X4.7 prop. The Wing Dragon has a stretched 51 inch wing and weighs 32 oz with camera. I might even go so far as to order an easy star instead and use that for urban AP
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN%3AIT&rd=1
I think I'll try a five channel RX in the Wing Dragon first so now I gotta do some more shopping. Any recommendations on that? I'll be using a standard six channel futaba transmitter.
Last edited by randall1959; Aug 25, 2005 at 03:53 AM.
Old Aug 25, 2005, 11:41 AM
Mr.RC-CAM is offline
Find More Posts by Mr.RC-CAM
Registered User
Mr.RC-CAM's Avatar
I couldn't find any specs. It's hard to say if you'll like it (my gut feeling is that it may be marginal, but it really hard to say without the specs).

BTW, since you are new to electrics: One of the most important e-model tools you will need is an ammeter (with a range to about 15A for this setup). Before the first flight, always measure the motor current, with you prop choice, to ensure that the setup is sane. This will save you from motor and battery damage and help you optimize the prop choice (just change the prop to dial in the target motor current).
Old Aug 25, 2005, 12:14 PM
MorrisM is offline
Find More Posts by MorrisM
Registered User
MorrisM's Avatar
Randall1959,
I have been looking at this motor. It seems to be the same as the on you got, and the price is right. Aero-nuts has a lot of data too.
http://www.aero-nuts.com/product_inf...roducts_id=265
Morris
Old Aug 25, 2005, 12:56 PM
JettPilot is online now
Find More Posts by JettPilot
JettPilot's Avatar
That motor looks really cheap You would be better off with something like this

http://www.horizonhobby.com/Shop/ByC...rodID=EFLM3005

If that is to big they sell all different sizes, and you know its a good quiality motor...
Site Sponsor
Old Aug 25, 2005, 01:01 PM
slopedog is offline
Find More Posts by slopedog
Registered User
slopedog's Avatar
Randal, what is the approximate airborne weight of the platform that you have in mind?

SD
Old Aug 25, 2005, 04:05 PM
randall1959 is offline
Find More Posts by randall1959
Suspended Account
The all up weight will be around 32 oz or a little less. I has a 51 inch wing. I'm planning on using a 10 cell nimh pack at first, then maybe move up later. I allready have the nimh's.
Right now I'm using a stock 400 motor with a 7X3 prop.
Old Aug 25, 2005, 08:58 PM
Daniel G is offline
Find More Posts by Daniel G
It's been a while.
Daniel G's Avatar
It'll definatly be an upgrade from the 400.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Newbie..can anyone tell me what this is please??? UKPilot Electric Plane Talk 6 Apr 18, 2007 10:05 AM
Help! Can anyone tell me if this will work For my Rotofly? jayb79 Micro Helis 0 May 19, 2006 09:04 PM
Can anyone tell me about Ikarus Shockflyers? snowball1288 3D Flying 11 Mar 11, 2005 11:17 PM
Can anyone tell me about the Mabuchi 2n motor? jayboy Parkflyers 1 Jul 12, 2002 07:53 PM
Can anyone tell me ?? About this motor Gene Gold Power Systems 5 Oct 04, 2001 04:32 PM