Thoughts On U-Can-Do 3D Flight-Flex EP ARF - RC Groups
Thread Tools
Aug 11, 2005, 10:19 AM
Registered User

Thoughts On U-Can-Do 3D Flight-Flex EP ARF

Looking to pick this plane up as I am first time flyer. Any Thoughts?
Sign up now
to remove ads between posts
Aug 11, 2005, 02:02 PM
Registered User
No don't. People have all kinds of complaints about them. I don't much care for mine; After an afternoon in my car, it is no longer straight and flies all over the place.

The power system is great though. Especially on 3cel lipos. If you get one, pay very careful attention to the directions.
Aug 12, 2005, 08:20 AM
Purdue Engineering
Rocketman1092's Avatar
You can't just buy anything for a first plane! A 3D plane like this would be the worst possible choice. It should be your 3rd plane. Here is a good trainer: The combo package comes with everything so you don't have to go buy a bunch of electronics separately like you would for the U-Can-Do.
Aug 12, 2005, 02:34 PM
Registered User
stamper's Avatar
This plane was fun, but dont expect it to last long. The workmanship is not the best and for the money you can find much better planes. My plane didn't like any speed whatsoever and the tail would shake all over the place. With some work it can be stabilized, but not worth the time if you ask me.
Aug 14, 2005, 08:04 AM
Naturally altered
It's a funny plane in the sense that the foam is very soft, so much so a zipper is used for the battery compartment, While the soft foam will take a lot of abuse, the light framing of the wings will not. I guess GP deserves some kind of credit for bringing something entirely different on the market... as far as the result goes.. oh.. welll...

This would be a reasonnable option for a first time 3d'er who has reasonnably mastered an aileron plane before, but not good at all for a first time flyer. Look into the Slow Stick, Beaver, E-starter and the likes for your first steps into RC flying.
Aug 14, 2005, 11:54 AM
I used to be all thumbs...
NumbSkull's Avatar
I would have to agree with everyone else. I have a U-Can-Do, and I am looking forward to my next model. It is good in the sence that it is made of EPP foam and can take some abuse, but the foam is very soft, and will tear on a bad landing. I too left mine in my car for an afternoon, and it took a lot of time and work with a hair dryer to straighten it out. I also had to put a carbon rod down the bottom of it to try and straighten out the fuse after the damage from the car.

It does have a nice power system for being brushed. But it can be hard to controll if your not used to ailerons.

Not to mention that I have been waiting for two weeks to find a replacement gear for the gear box. I stripped mine out when my prop saver lost the prop. I don't know if this is normal for the parts for this plane, but I am disapointed in the fact that I cant find the parts in stock. You don't see that very often with a GWS or other planes.
Aug 14, 2005, 01:48 PM
Oldie but goodie
Popsflyer's Avatar
We've had a few at the LHS where I work at. Funny thing is that so far almost all of them have been broken in the store, just from people examining them. The wing is especially fragile.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion help mounting cowl on U CAN DO 3D newguy2005 Fuel Plane Talk 5 Jul 02, 2007 05:50 PM
Discussion using servos from yak 55 3d on u can do 3d ep galsim 3D Flying 2 Aug 27, 2006 12:32 AM
RFC: U-Can-Do 3D Flight-Flex EP ARF GregTo Beginner Training Area (Aircraft-Electric) 3 Jun 09, 2005 10:57 AM
Great Planes U-Can-Do 3D Flight-Flex EP ARF rtn9105 Electric Plane Talk 3 Mar 18, 2005 02:52 PM
Great Planes U-Can-Do 3D Flight Flex EP arf Merkaba Foamies (Kits) 10 Mar 17, 2005 04:02 AM