Shop our Airplanes Products Drone Products Sales
Feb 10, 2006, 04:07 PM
Maz
Maz
Mig Killer
Maz's Avatar
The video of the Hydro plane from Hobby-Lobby is really cool. I dont know if you guys saw the thread about the crash sale, but some guy said he had the inside scoop for last weeks sale. He said it was going to be the Hydro plane. Of course it wasn`t. I`m kind of glad because I dont know if I could have resisted temptation.

Dave
Sign up now
to remove ads between posts
Feb 11, 2006, 01:40 PM
Speed Freak
Spid's Avatar
Made some progress on the Rambler EP. Hinged Rudder to the vertical fin and attached to the fuse. Attached the horz. stab and elevator to the fuse. Installed the control horns for the rudder, elevator and ailerons. Also, installed the tail skid. It's coming along
Feb 11, 2006, 04:10 PM
Lazy dog
OhioPete's Avatar
Nice Spid, looks like it'll be a quick build.

Anyone have any tips for covering a rubber powered plane with tissue? I'm too the point where I need to cover before I can proceed. Jack recommend using a glue stick on the wood where the covering will make contact but is it as easy as laying it on and pulling it taught?
Feb 11, 2006, 04:43 PM
Suspended Account
here's some links.
http://www.modelairplanenews.com/how...sue_cover2.asp
this one's a good site except the guy uses dope. use white glue thinned 50/50 with water.
http://www.antiquemodeler.org/Comet_...ing_Guide_.htm
http://balsamodels.com/phpBB/viewtop...07114a18c4d741

good one too.
http://findarticles.com/p/articles/m...02/ai_n8942705

hope this helps.
Feb 11, 2006, 06:40 PM
Speed Freak
Spid's Avatar
Quote:
Originally Posted by OhioPete
Nice Spid, looks like it'll be a quick build.
Thanks Pete. It's a real straight forward build. I should have it finished next week sometime as soon as my stuff from Tower gets here.

I hope it flies as good as it looks.
Feb 12, 2006, 09:20 AM
Omphaloskeptic
SaulOhio's Avatar
Hydro is comming along well. Finished gluing most of it together, using Gorrilla glue. Going to put in a 400 brushless with a 6-1 gearbox, 10" prop.
Feb 12, 2006, 06:16 PM
Suspended Account
finished up the DVII tonight. new pics in build thread.
Feb 12, 2006, 07:43 PM
Omphaloskeptic
SaulOhio's Avatar
Quote:
Originally Posted by sgtdirt
finished up the DVII tonight. new pics in build thread.
Nice. Very patriotic.
Feb 12, 2006, 10:02 PM
Indoor Free Flight Modeler

SR-71 in finished!


Well I got the finishing touches put on the SR-71. AUW is about 16 ounces. Should be a blast. I need to make a bungee launcher though. No way to hand launch this baby.
Feb 12, 2006, 10:03 PM
Indoor Free Flight Modeler
Quote:
Originally Posted by sgtdirt
finished up the DVII tonight. new pics in build thread.
Jack,

Looks great! I see you are putting your free flight skills to good use!

Don
Feb 12, 2006, 10:10 PM
Suspended Account
GEEZ, don! that thing looks HUGE! it should look cool zoomin' around too.
Feb 12, 2006, 10:27 PM
Indoor Free Flight Modeler
The photo makes it look a bit bigger I think. It is 35" long and 19.5" wingspan.
Feb 12, 2006, 10:37 PM
Lazy dog
OhioPete's Avatar
Great job to the both of you! Kinda of opposite ends of the flight spectrum with the DVII and an SR-71

I made some progress as well on my FF BirdDog. I got all the covering done. I used the 50-50 white glue/water mix to tack the covering down, seems to have worked o.k. The curves were a little tricky byt they came out o.k, not perfect but pretty good for a first attempt IMO.
Feb 13, 2006, 07:15 AM
Speed Freak
Spid's Avatar
Nice job guys! There sure seems to be a lot of building going on. It's so cool seeing all the different types of planes everyone's building!
Feb 13, 2006, 08:24 AM
Registered User
Stark Flyer's Avatar
Been doing some building. TM for my daughter, Chipmunk and now a new Dandy.

Dick
Last edited by Stark Flyer; Feb 14, 2006 at 08:19 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
What's on your workbench? Mars Flyer Alabama's Rocket City Renegades 2620 Aug 10, 2015 07:12 AM
Discussion What's on your workbench? himszy Submarines 21 Jan 01, 2006 12:25 PM
what controls do what on your Tx. I think mine are wrong. Fragster2001 Micro Helis 7 Jul 01, 2004 06:31 AM
Yippee! What is on your building table? Arrow Parkflyers 45 Nov 22, 2003 01:37 AM
What's the rpm on your x-250? temacc Electric Plane Talk 5 Jun 11, 2001 10:24 AM