Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Aug 18, 2005, 10:37 PM
OhioPete is offline
Find More Posts by OhioPete
Lazy dog
OhioPete's Avatar
Any chance to get it in the air by Sunday? Weather permitting of course.
Sign up now
to remove ads between posts
Old Aug 18, 2005, 10:55 PM
The Don is offline
Find More Posts by The Don
Park Pilot Mag. Jets Columnist
I figured since I started this thread I should contribute!

Here is my newly finished Adrenalin sport pylon model. AUW is 17 oz. 3 cell TP2 2100 mah pack. The motor is a "Don Special", I had an ultrafly D/13/32 which was not running properly (had a partially cracked wire inside), so I unwound it and rewound with 10 turns of 23g wire in Wye configuration. Now I can run a 6 x 4 APC prop direct drive at about 17,000 rpm and about 12 amps. I want to get a 6 x 6 prop for more speed but this should do me fine for now. Can't wait to try it out! Now I just need a spinner and I will be all set!

Tommy thanks for getting me the motor spec from that old Hobby Lobby catalog. I was able to use that info to rewind the motor I had and saved me $70!

Don
Old Aug 18, 2005, 11:13 PM
kdahlhaus is offline
Find More Posts by kdahlhaus
Registered User
kdahlhaus's Avatar
Working on Gene Bond's Slow Stang. It's about the same dimensions as the slow stick and will have ailerons. Blucor is amazing.
Last edited by kdahlhaus; Aug 18, 2005 at 11:26 PM.
Old Aug 18, 2005, 11:31 PM
sgtdirt is offline
Find More Posts by sgtdirt
Suspended Account
Quote:
Originally Posted by OhioPete
Any chance to get it in the air by Sunday? Weather permitting of course.
Riiiight!
who do you think i am? Jim (bruswickOH)?

i'm a slooow builder. maybe next Sun.

don,
is that a bill griggs design?
Old Aug 19, 2005, 05:55 AM
BrunswickOH is offline
Find More Posts by BrunswickOH
Brunswick, Ohio
BrunswickOH's Avatar
Quote:
Originally Posted by sgtdirt
who do you think i am? Jim (bruswickOH)?

Hey now, I've been working on this darn CAP for quite a while now and I'm still not sure I can have it ready for Sunday(I probably won't be able to make it this Sunday anyway so maybe it will be ready for the following Sunday)

Jim
Old Aug 19, 2005, 05:31 PM
sgtdirt is offline
Find More Posts by sgtdirt
Suspended Account
Quote:
Originally Posted by BrunswickOH
Hey now, I've been working on this darn CAP for quite a while now.......
Jim
yeah, but that's CAP #2!

what's your fastest build?
Old Aug 21, 2005, 05:02 PM
PerfectStranger is offline
Find More Posts by PerfectStranger
one game away...
PerfectStranger's Avatar

SA diddlebug


putting the wraps on a stevensaero diddlebug. have to install electronics and 3 pieces of solite.

matt
Old Aug 21, 2005, 05:04 PM
PerfectStranger is offline
Find More Posts by PerfectStranger
one game away...
PerfectStranger's Avatar
this was supposed to go in the "what's on your workbench thread". sorry.

matt
Old Aug 21, 2005, 05:14 PM
OhioPete is offline
Find More Posts by OhioPete
Lazy dog
OhioPete's Avatar
Looks good so far!

What motor do you have in this plane?
Old Aug 21, 2005, 05:41 PM
PerfectStranger is offline
Find More Posts by PerfectStranger
one game away...
PerfectStranger's Avatar
it's a gws geared setup...one of the LPS (light power system) i think. really small can! there's a pseudo glow motor ca'd to the gearbox for effect. looks pretty cool.

lps geared setup
2s 250mah
bluebird 4.3g servo X2
berg4
cc pixie7
Old Aug 21, 2005, 06:13 PM
sgtdirt is offline
Find More Posts by sgtdirt
Suspended Account
matt,
looks sweet! don't you just love the stevens aeromodels!!?
they fit together very nicely.
i should have my SQuiRT sanded and ready for covering by tomorrow evening.

i guess i have to buy the diddlerod now.
Old Aug 21, 2005, 06:16 PM
Tommy632 is offline
Find More Posts by Tommy632
Mayor of Simpleton
Tommy632's Avatar
Quote:
Originally Posted by sgtdirt
i guess i have to buy the diddlerod now.
Just in time for the ndoor season.
Old Aug 21, 2005, 09:03 PM
beanoman is offline
Find More Posts by beanoman
Registered User
beanoman's Avatar
hey, found out about your club a few days ago, scott pm'ed me about it .

heres a little plane i finished and maidened today, and it flew pretty good.

its called 'the ugly' for good reason- just gotta take those flames off of the tail to complete the effect. also, its a bunch of old parts from other stuff- wings from one plane, tail feathers from another, battery from yet another plane, and pther parts and peices laying around.

its a 'bit car' conversion- look in the indoor and micro plane forum for more info on that. basicly, you gut very small and extremely cheap non proportional 2 channel rc car, to get the reciever- weighs 2 grams. anyways, basic specs on it-

16 inch wingspan
25.5 grams auw
150 mah lipo
m20 motor/10mm diameter
6mm diameter motor actuator, spring centering.

ben

Old Aug 21, 2005, 09:24 PM
PerfectStranger is offline
Find More Posts by PerfectStranger
one game away...
PerfectStranger's Avatar
that's one neat little plane with a VERY fitting name!

matt
Old Aug 21, 2005, 10:21 PM
OhioPete is offline
Find More Posts by OhioPete
Lazy dog
OhioPete's Avatar
Quote:
Originally Posted by mattalbr
it's a gws geared setup...one of the LPS (light power system) i think. really small can! there's a pseudo glow motor ca'd to the gearbox for effect. looks pretty cool.
That little fake glow motor thing threw me off in the first photo. That's pretty cool

BTW - Welcome Beanoman!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
What's on your workbench? Mars Flyer Alabama's Rocket City Renegades 2620 Aug 10, 2015 08:12 AM
Discussion What's on your workbench? himszy Submarines 21 Jan 01, 2006 01:25 PM
what controls do what on your Tx. I think mine are wrong. Fragster2001 Micro Helis 7 Jul 01, 2004 07:31 AM
Yippee! What is on your building table? Arrow Parkflyers 45 Nov 22, 2003 02:37 AM
What's the rpm on your x-250? temacc Electric Plane Talk 5 Jun 11, 2001 11:24 AM