Brushless GWS P-51 - RC Groups
Thread Tools
This thread is privately moderated by SammyB, who may elect to delete unwanted replies.
Jul 25, 2005, 08:33 PM
Trader Rating: 229
Rem The Wasp CV-7 9/15/42
SammyB's Avatar

Brushless GWS P-51

For sale is my GWS P-51. Includes himax 2015-5400 in gws "a"ratio gear box. Spins a 6-7 inch prop and on 3 cells is very fast. I filled the dreaded panel lines that cause the famous tip stall and havent had any problems with the stall. Now stalls straight ahead. Landing gear caught once on landing and cracked the fuse at the sadle and at the l/g mount/wing . Can barely see it now and doesnt affect performance at all. A few scratches and dings here and there but nothing huge or out of the ordinary for a used foamy. Includes pilot figure shown. I cut out an extra hatch attached with rare earth magnets behind the prop to install the battery. Lets you get the battery far enough forward so you don't have to add weight to get it to balance. Looks very clean and hatch was made nicely. Has dubro wheels all around on modified wattage f-22 landing gear which is way stronger than the wobly gws one. Will include 4 blade spinner and 2 blade spinner. I will change the gear ratio to your choice of s1,s2,a,b,c,or d and will throw in a coresponding prop. I recomend the "a" drive with a 6x5 prop which is what is on it now. Provides quick take offs and great speed but it is up to you. The plane has been weathered with artists chalk and an airbrush. Guns were also added to the wings. Nice invasion stripes have been made from monokote and applied under the wings. Solid flyer.

85.00 shipped

no electronics except himaxx brushless motor.
Last edited by SammyB; Jul 25, 2005 at 08:49 PM.
Sign up now
to remove ads between posts
Jul 25, 2005, 10:24 PM
Trader Rating: 59
Registered User
kissfan's Avatar
very nice plane sammy, wish I had the extra $$$$
Jul 25, 2005, 10:50 PM
Trader Rating: 91
neLNDGuCNwkUP2isAgd1 !!!
Hey Sammy!

I'll take it! It looks great! You will put it in a sturdy box so it will survive the trip, right! The gearing and propage as you have it will be fine. If you say it flys good, I believe you!

Mike M.
Last edited by MadJocko; Jul 25, 2005 at 10:58 PM.
Jul 25, 2005, 10:55 PM
Trader Rating: 152
t = Col Frank Fitts
tdab's Avatar
I got a plane from Sammy before (GWS Spitfire) and it was packed nice.

You will be ok.

Jul 25, 2005, 10:58 PM
Trader Rating: 229
Rem The Wasp CV-7 9/15/42
SammyB's Avatar
Excellent. It will be packed nice. Can you give me a day or so to pull the radio gear? I didn't want to do it incase it didn't sell. PM me your info and how you will be paying and I'll get it ready to go for you. Thanks Tom for the kind words.
Jul 25, 2005, 10:58 PM
Trader Rating: 229
Rem The Wasp CV-7 9/15/42
SammyB's Avatar
I just noticed you live in Temecula. Want to meet somewhere in the middle?

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
GWS P-51 mods for 400 or brushless geared gouda Parkflyers 10 Feb 14, 2003 09:17 AM
GWS P-51 HELP..on Brushless setup Doc Dyer Parkflyers 4 Jan 27, 2003 11:55 PM
Brushless in GWS P-51? Twmaster Scale Kit/Scratch Built 3 Jan 25, 2003 08:33 AM
GWS P-51: Brushless candidate? PDX Slope Pilot Parkflyers 5 Jan 10, 2003 01:13 PM
Brushless GWS P-51 ROCKS !!!!!! RMason Parkflyers 15 Jan 03, 2003 06:55 AM