Howdy poeple

I recently noticed Foxeer's new Reaper ESC's which is a 20x20 4-in-1 and that is nothing new ofcourse
But.. this is one 8S capable (or so they say :P) ... Very exciting and interesting! More then enough reason for a new build!

Comoing across these new ESC's coiincided with Rotorama releasing a new 5" racing frame If you follow my channel, you probably know I often use their frames.. Sooo done deal! This will be a 5" 8S racer build

Link to the frame: Rotorama Samurai v3 Pro

First things first! Here is a review of that new frame

Rotorama Samurai V3 Pro (Last Samurai Build Project) - FRAME REVIEW (14 min 34 sec)

The other parts I'll use:

Foxeer Reaper ESC: https://www.foxeer.com/foxeer-reaper...a-8s-esc-g-327

Foxeer F722 mini: https://www.foxeer.com/foxeer-mini-f...taflight-g-299

RCinpower Wasp Major 22.6-6.6 1860kv: https://www.rotorama.com/motory/rcin...2-6-6-6-1860kv

DALprop (new) Cyclone T5146.5 racing prop: https://www.foxeer.com/new-cyclone-t-54

Foxeer Micro Predator 5: https://www.foxeer.com/foxeer-19-19m...uper-wdr-g-303

TBS Unify Pro32 Nano: https://www.rotorama.com/fpv/tbs-uni...-v1-1-25-500mw

Foxeer Micro Lollipop ufl: https://www.foxeer.com/foxeer-5-8g-m...-antenna-g-280

Frsky XM+ receiver: https://www.rotorama.com/rc/frsky-xm

Halloa RC people

as many of you will know I like building quads, and just you might do: when I find components that WORK I keep using them for new builds..
This time however I wanted to try electronics from Foxeer.. Partly because it could be more interesting for You as well...

Soooo here we are.. This is part of my 8S racer build project.. Let's see what parts are supposed to make this quad actually fly

8S Foxeer F722 Stack + RCInpowers :) (Last Samurai Build Project) - POWER SETUP (23 min 59 sec)

Halloa RC people

as many of you will know I like building quads, and just as you might do: when I find components that WORK I keep using them for new builds..
This time however I wanted to try electronics from Foxeer.. Partly because it could be more interesting for You as well...

In this case it's the well known Predator v5 but I am using a VTX I've never used: the TBS Unify Pro32 nano....

Foxeer Predator 5 + TBS Unify Pro32 Nano + Foxeer Lollipop (Last Samurai Build Project) - FPV SETUP (10 min 26 sec)