RunCam Hybrid 2 Dual Camera

The RunCam Hybrid Get Updated

The Hybrid 2 has been upgraded with Phoenix 2 imaging and is a solid upgrade over the original Hybrid dual camera system. If you are looking for a dual FPV camera for racing or freestyle, then this might be the camera for you.

The Hybrid 2 is equipped with a 145° wide-angle Sony 4K HD sensor as well as a RunCam Racer together on one board. It features on board 4K recording, low latency, 20x20 stack mounts, remote start/stop recording and setting changes made via the RunCam App. It's a pretty sweet little package for $99.

Check out the RunCam Hybrid 2 Dual Camera Here

Specifications:

• HD sensor: SONY 8MP
• Analog sensor: SONY 1.3MP
• Field of View (FOV): HD Recording FOV 145°(FPV FOV 150° @ 4: 3)
• Video Resolution: [email protected] / [email protected] / [email protected] / [email protected] / [email protected] / [email protected] / [email protected]
• Video File Format: MP4
• TV Mode: NTSC (720*480)/PAL (720*576) Switchable
• Interface: HD supports UART remote control; FPV(Analog) supports UART firmware update.
• Max Micro SD Card Supported: Up to 128G. Samsung's U3 card is recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors.
• Mounting Holes Distance: 20*20mm
• PCB Size: 29*29mm
• Lens Module Size: 19*25mm
• Lens Specs: HD Lens - M10 / FPV Lens - M8
• Power Input: DC 5-20V (Non-direct power supply from 4s battery or above. Powered directly with battery will generate surges and burn the camera.)
• Working Current: 480mA @5V / 140mA @12V
• Weight: 18g