Channel 6 Video Pan Servo - RC Groups
Thread Tools
Jun 20, 2005, 11:33 PM
It Wasn't Me!!!!
InspectorGadget's Avatar

Channel 6 Video Pan Servo

Someone may have done this already, but I thought I would share an idea that I have had. I placed another servo into the side of my A/P platform, a GWS Beaver, and attached my video cam to the servo arm. I changed the GWS 4 channel reciever to a GWS 6 channel and hooked up the servo on the flap channel #6. Now I can pan the forward looking camera straight down or back up to the horizon while in flight. I used my EPA to fine tune the angle of the camera so as not to angle up to high and see the wing. The servo pans smoothly and I will test it out in the morning.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
FMA Extreme 5: can I get channel 6? tjcooper Radios 1 Feb 03, 2004 04:17 PM
Channel 6 with 5 channel Receiver? NewNCEGuy Radios 11 Nov 25, 2002 09:42 PM
Do you need a 5+ channel radio for a '2 servo' aileron plane? sizam Parkflyers 5 Sep 07, 2002 11:49 AM
Hitec Focus 3 AM w/Receiver channel 16 & HS300 Servo $45 shipped!--SOLD Tigger Aircraft - Electric - Airplanes (FS/W) 2 May 13, 2002 04:44 PM