Shop our Airplanes Products Drone Products Sales
Thread Tools
Apr 16, 2002, 02:35 PM
Registered User

Cnc Foam Cutter


I THOUGHT SOME OF YOU MIGHT LIKE TO SEE THE
4 AXIS FOAM CUTTER I BUILT,
HOBBYCNC.COM 4 AXIS FOAM CUTTER KIT FOR MOTOR/ ELECTRONICS, $124.00
GILLES MULLER FRENCH SOFTWARE TO RUN IT. WORKS GREAT $30.00 (FREEWARE) 30 DAYS
Last edited by grr1941; Apr 17, 2002 at 03:04 PM.
Sign up now
to remove ads between posts
Apr 16, 2002, 03:25 PM
Registered User

PHOTOS TOO BIG


I AM TRYING TO REDUCE THE FILE SIZE
OF MY PHOTOS ... SHOULD HAVE SOME DONE
ON WED I HOPE


GARY
Apr 17, 2002, 07:53 AM
Registered User

CNC PHOTOS I HOPE


I CUTDOWN THE PHOTO FILE SIZE
I HOPE THIS WORKS
Apr 17, 2002, 07:55 AM
Registered User

MORE CNC PHOTOS


MORE
A CLOSE UP OF THE WIRE GUIDE

THE BOW IS .8 DIA CARBON FIBER TO KEEP THE
WEIGHT DOWN ON THE STEPPER MOTORS . I BOUGHT
THE TUBE FROM AEROSPACE COMPOSITES.
Last edited by grr1941; Apr 17, 2002 at 03:14 PM.
Apr 17, 2002, 07:56 AM
Registered User

CNC PHOTOS


LAST ONE
.250 TEFLON BALL WITH .013 DIA HOLE AS WIRE GUIDE
.008 DIA WIRE , THIS LETS THE WIRE SLIDE WITH NO
LOAD ON THE BOW ,REQUIRED IF CUT TAPERED WINGS,ETC
TOO MUCH TIME SHOULD BE BUILDING
Last edited by grr1941; Apr 17, 2002 at 03:08 PM.
Apr 17, 2002, 09:46 AM
Strange Plane Central
frankenfoamy's Avatar
That is some beautiful aluminum work.

Lets see it in action!
Apr 17, 2002, 10:22 AM
Cal Slope Criminal@DV
Duke58's Avatar
Very clean looking work Grr, I'm in Hayward ,want to cut me some cores? I have some Litho camera stuff I've been hacking on to maybe make a 3 axis router but I havn't gotten beyond the hacking stage yet.
Apr 17, 2002, 11:08 AM
Registered User
Well done.. fabulous piece of workmanship.
Now that it's built what's it actually for??
Lotsa hardware for merely chewing up a piece of DOW Insulation ;-)
Only use I've ever seen that actually required a CNC foam cutter was the individual rib section/incidences for Alfons G's Horten IV...
Apr 17, 2002, 12:12 PM
Registered User
Carl Petersen's Avatar
Nice work!

Tell us a little more about it. What's the computer interface look like? What software do you run to generate the airfoils.
Apr 17, 2002, 12:30 PM
Registered User
Gary,
WOW! That's really slick! Did you make the linear slides, or are bought from somewhere?
Mark
Apr 17, 2002, 01:15 PM
Registered User

I saw it work!


I saw the CNC foam cutter of Grr1941 and it works so nice. I have never seen foam cores cut so precisely; not even from commercial kits.
Congrats Grr.
...so there is a small glider I designed a small slope glider. It has foam core wings. I was wondering if you could...
Apr 17, 2002, 03:59 PM
Registered User

LINEAR EXTRUSION


MRALSTON... I MADE THE AXIS WAYS FROM
THIS ALUM EXTRUSION
DELRIN BASE AS SHOWN 1/4-20 STEEL ROD IN A
OIL LITE BUSHING . DORLEC CORP. IN NJ
MAKES THE EXTRU.
Apr 17, 2002, 06:29 PM
Speed Demon
GregG's Avatar
This looks great! I've kicked around the idea of building one myself. Seeing your's is a great inspiration, thanks!
Apr 18, 2002, 08:30 AM
Suspended Account

selling them?


What are the odds you will make a sell a few of them?

I'm currently building the MM2001 cnc interface, and will need the mechanical part soon, your's is, by far, the most impressive set up I've seen.

Paul


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
CNC foam cutter electronics kit--anyone interested? fregon45 Foamies (Kits) 14 Jun 11, 2008 12:02 PM
CNC Foam Cutter Update. Photos posted fregon45 Foamies (Kits) 4 Jun 18, 2003 05:48 AM
How does a CNC foam cutter do tapered wings? Barrett Foamies (Kits) 5 Aug 02, 2002 11:28 AM
CNC foam cutter...I need some help. JayParke Power Systems 16 Apr 22, 2002 08:36 AM
Electronics kit for CNC Foam cutter--Anyone interested? fregon45 Power Systems 1 Mar 07, 2002 10:14 AM