Thread Tools
This thread is privately moderated by Battle28, who may elect to delete unwanted replies.
Dec 08, 2020, 02:42 PM
Trader Rating: 0
Registered User
Thread OP
$1,100.00 USD
Shipping negotiable
Sold

BAMF 2 DLG New in BOX w/ KST XO8N V5.0 servos


Bamf 2 new in box. This is a standard layup in the red color comes with KST XO8N V5.0 servos and a FRSKY G-RX6 receiver. Serious buyers only just in time for the holidays. I will work with you on the shipping. I get a discount through my work so just depending on the location and price I may cover it myself. Thats something we can discuss. Thank you all.
Last edited by Battle28; Jan 29, 2021 at 12:31 PM.
Sign up now
to remove ads between posts
Dec 08, 2020, 02:55 PM
Trader Rating: 133
Wayne Wimbish
wdwimbish's Avatar
$200 over list... Are you serious???

****edit****

Maybe you were looking at CAD $$
Last edited by wdwimbish; Dec 08, 2020 at 08:53 PM.
Dec 08, 2020, 03:21 PM
Trader Rating: 0
Registered User
Thread OP
Am I seeing list prices different than you? BAMF 2 from ArmSoar $852 also waitlisted with covid delays took me 3 months to get the DLG I'm selling. $186 for servos and $56 for the receiver on amazon with out taxes. Total $1094.00 with the potential to cover shipping? What are you showing for market price?
Dec 08, 2020, 04:29 PM
Trader Rating: 0
Registered User
clintc's Avatar
your off on the rx. It’s $38 at alofthobbies

And the plane is 815 on armsoarusa
Dec 08, 2020, 05:52 PM
Trader Rating: 0
Registered User
Thread OP
Sure enough you are correct. I didn't realize there was a difference between armsoar and armsoarusa one says $852 and the other $815.
Dec 08, 2020, 06:21 PM
Trader Rating: 0
Registered User
clintc's Avatar
Canadian vs USD

Thomas is tricky that way

Even so, with the wait list, if you’re including shipping...might be tempting

I really like mine. If I didn’t have another on order it would be very tempting.
Dec 08, 2020, 08:32 PM
Trader Rating: 168
Registered User
smokeytbear's Avatar
Please correct me if I'm wrong but this is a right hand launch specific plane/wing right? I see the wing bolts go thru the left wing panel to attach to the fuse right? Too bad I'd be all over this if it was for a lefty. GLWS.
Dec 08, 2020, 08:49 PM
Trader Rating: 133
Wayne Wimbish
wdwimbish's Avatar
What I'm seeing for prices:
For list values I see 815 for the kit, 168 for servos, and 38 for rx (which non-Frysky users won't need.) That's 1021 with the rx and 983 without. Shipping in US typically runs 60-75 so even with shipping included, 1200 would still be way above board.

(note: edited my previous post.)
Latest blog entry: Paying for Purchases by PayPal
Dec 08, 2020, 08:53 PM
Trader Rating: 133
Wayne Wimbish
wdwimbish's Avatar
Quote:
Originally Posted by smokeytbear
Please correct me if I'm wrong but this is a right hand launch specific plane/wing right? I see the wing bolts go thru the left wing panel to attach to the fuse right? Too bad I'd be all over this if it was for a lefty. GLWS.
The kit should be ambidextrous until after you mount the vertical. The 2pc wing has two bolts in each wing so that would not matter. I don't know if the wing comes with hard points pre-made in the mold (I expect it does in both wings, but that's just me,) for the peg but a hard point is an easy thing to make if you have to. Go for it.
Latest blog entry: Paying for Purchases by PayPal
Dec 09, 2020, 10:46 AM
Trader Rating: 53
Registered User
Pm sent , Jack
Dec 10, 2020, 11:25 AM
Trader Rating: 168
Registered User
smokeytbear's Avatar
Quote:
Originally Posted by wdwimbish
The kit should be ambidextrous until after you mount the vertical. The 2pc wing has two bolts in each wing so that would not matter. I don't know if the wing comes with hard points pre-made in the mold (I expect it does in both wings, but that's just me,) for the peg but a hard point is an easy thing to make if you have to. Go for it.
You are absolutely correct...thanks for clearing that up. I wish you wouldn't have because now I'm very tempted to buy this.

I'm worried about the 0 post and 0 trader ratings. Battle28 do you have any other references you can offer up to make buyers a bit more comfy with hanging out $1100 bucks? Thanks
Dec 10, 2020, 04:49 PM
Trader Rating: 0
Registered User
Thread OP
I looked at the wings recently there is no peg installed. I think it's ambidextrous. If anyone wants to reach out to me. Just send me a message with a phone number. I will gladly talk to them on the phone. I'm not in the community of rc so I sit behind the scenes and read reviews and post. I'm in aviation and well I'm sure you all know how that's going right now. Just trying to recover funds from this purchase. Thanks guys for looking.
Dec 18, 2020, 01:37 AM
Trader Rating: 3
Registered User

Bamf 2


I'm interested...can we talk?
Dec 18, 2020, 11:19 AM
Trader Rating: 0
Registered User
Thread OP
Yes Send me a message with your number and ill call as soon as I'm able I will be at work until 8pm California time.
Last edited by Battle28; Dec 18, 2020 at 12:14 PM.
Dec 18, 2020, 11:54 AM
Trader Rating: 3
Registered User
Sent you a PM.


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale KST X08 V5.0 servos and pulleys JONKE Aircraft - General - Radio Equipment (FS/W) 2 Oct 29, 2019 10:47 AM
Sold KST X08 V5.0 Servo - New in Box PDX Slope Pilot Aircraft - General - Radio Equipment (FS/W) 0 Dec 08, 2018 04:39 PM
Sold KST X08 V5.0 Servo PDX Slope Pilot Aircraft - General - Radio Equipment (FS/W) 0 Nov 11, 2018 06:39 PM
Sold Kst ds215mg mg v3.0 new in box price is for four servos ! shipped . betterrcbuilder Aircraft - General - Radio Equipment (FS/W) 3 Mar 09, 2018 07:36 PM
Sold KST X08 V5.0 servos Lenny970 Aircraft - General - Radio Equipment (FS/W) 2 Mar 03, 2017 09:25 AM