Thread Tools
This thread is privately moderated by CrackerBox2020, who may elect to delete unwanted replies.
Dec 02, 2020, 05:51 PM
Registered User
Thread OP
Build Log

Floatation


Deck on and getting prepped for primer.
Flotation inside shots.
1" thick block cut to form to the inside of the hull, one layer from engine forward, one layer down the sides, and a second layer up front ahead of the fuel bag location. About 4 sq. ft. overall.

Been swamped at work, and pulled off for a while to knock out some Christmas Presents.

If I can get to it I'm hoping to prime and sand this weekend to get the color coats on.
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Floatation in ABS Hulls Bill Diedrich Sailboats 4 Feb 09, 2020 06:40 PM
Discussion Floatation in ABS Hulls Bill Diedrich Scale Boats 0 Feb 09, 2020 07:58 AM
New Product New HydroFoam Floatation System for your boats waverider Sailboats 2 Feb 07, 2007 09:56 PM
New Product New HydroFoam Floatation System for your boats waverider Scale Boats 3 Feb 07, 2007 08:16 PM
New Product New HydroFoam Floatation System for your boats waverider Dock Talk 6 Feb 07, 2007 12:58 PM