iFlight RC ProTek35 HD CineWhoop
iFlight RC has a new drone available for pre-order called the ProTek35 HD CineWhoop.
News
By Jason Cole |
New CineWhoop Coming Soon
iFlight RC has a new drone available for pre-order called the ProTek35 HD CineWhoop. It looks great and offers some performance benifits over the Bumblebee. The ProTeck35 is a 3.5" drone that uses 2203.5 motors for more power and less heat. It can carry GoPro and Insta360 Cams and still get around 5 minutes of flight time outside. The frame design is easy to work on and can be disassembled with just 12 screws. Check out the full feature list and specs below.
Features:
- No Props or frame in view!
- High performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
- T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
- Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
- Low Resonance frame construction (Less Jello, more Cinematic footage)
- DJI FPV Air Unit 720p 120fps FPV feed (record in 1080p/60fps)
- Butter smooth 2203.5 3600KV (4S)
- Pre-tuned with smooth freestyle settings
- A basic PID- and Filter tuning was applied for a great flight experience!
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
ProTek35 BNF Specs:
- Board Beast Whoop F7 AIO 45A (LINK)
- Motor: XING 2203.5 3600KV (4S)
- Wheelbase: 151mm
- Body Size: 118*94.5mmmm
- Bottom plate thickness: 3.5mm
- Top plate thickness: 2mm
- Top and bottom plate spacing: 20mm (aluminum standoff height)
- Propeller size: 3.5 inch
- FC pattern: 25.5*25.5mm / 20*20mmmm
- FPV cam spacing: 20mm
- Weight: 348.3g (without battery)
ProTek35 HD Quad BNF Included Components and Parts:
- Pre-built and tested Quadcopter
- 1x ProTek35 Frame
- 1x DJI FPV Camera
- 1x DJI FPV Air Unit Module
- 2x DJI FPV Air Unit Antenna SMA
- 1x TPU Bracket for DJI Air Unit Module
- 1x TPU Antenna holder for DJI antenna
- 2x TPU camera side plate soft mount
- 2x Nazgul 3535 propeller (Set of 4 - Color May Vary)
- 1x iFlight Lipo Strap 15*150mm (Color May Vary)
- 1x iFlight Lipo Strap 15*250mm (Color May Vary)
Check out the iFlight RC ProTek35 HD CineWhoop Here
| Introducing ProTek Series - More Than Just Cinematic (1 min 43 sec) |
| Thread Tools |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
Awesome looking kwad! Did you guys have to do the esc fix that Bardwell talks about in this video? I have one coming and wanted to know if it's needed. Also is this also needed for the protek 35? or just the protek 25?
|
||
|
|
|||
|
|
|
|
|
I think the issue is only affecting Protek 25 as the AIO FC is different on Protek 35 with BLheli 32.
My Protek 35 has a low throttle cruising wobble out of the box which I can't tune out though. It is not obvious in my video as Hero 7 Hypersmooth function has removed it but it is there in FPV video. |
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Similar Threads | |||||
| Category | Thread | Thread Starter | Forum | Replies | Last Post |
| News | iFlight BumbleBee HD V2 CineWhoop BNF | Jason Cole | Mini Multirotor Drones | 1 | Jul 30, 2020 02:51 AM |
| Whoops! | iFlight BumbleBee 3 Inch 6S HD CineWhoop w/DJI Caddx | Justapoke | Micro Multirotor Drones | 8 | May 23, 2020 02:30 PM |
| Discussion | GEPRC CineEye 79mm CineWhoop FPV Racing RC Drone PNP/BNF Caddx Turtle V2 1080P HD | Merch | Micro Multirotor Drones | 0 | Dec 16, 2019 11:09 AM |
| New Product | iFlight MegaBee 153mm Cinewhoop Frame for DJI FPV Air Unit RC Drone FPV Racing | Merch | Banggood.com | 0 | Sep 15, 2019 03:39 PM |
| New Product | iFlight BanShee 152mm 3 Inch 3mm Arm Cinewhoop Carbon Fiber Frame Kit 48g for RC Dron | alex_nikiforov | Banggood.com | 1 | Apr 10, 2019 08:03 PM |