Thread Tools
This thread is privately moderated by old4570, who may elect to delete unwanted replies.
Nov 17, 2020, 07:40 AM
Registered User
old4570's Avatar
Thread OP

Hahahahaha - Oh dear !

The best laid plans hu ?

So the adapter plate fits the mount - BUTT ! Not with the motor in place

So I will need to Print out a new adapter plate . Drill out some holes in the factory 1106 mount so I can fit the 1306 screws for the motor from the back . I will have to counter sink the factory screws to clear the motor .

It's late , 11.30pm . Im tired . Hay fever is hammering me . I had to fix the filament feed on the printer ( I should have done it when I got it - better late than never ) .
One step forward , two steps back .
im going to bed ...

before I forget - The spacing on the 1106 mount is 18mm not 17.5mm ..
Last edited by old4570; Nov 17, 2020 at 07:49 AM.
Sign up now
to remove ads between posts

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion oh dear ... let's not hurt their mental well being ... logan5 Life, The Universe, and Politics 21 Apr 21, 2018 09:43 AM
Discussion Oh dear Courtney .... logan5 Life, The Universe, and Politics 8 Jan 05, 2017 02:38 PM
Discussion Oh Dear, Oh Dear, time for a tin hat, literally. eflightray Scale ARF/RTF 16 Jun 17, 2013 09:36 AM