Thread Tools
This thread is privately moderated by Old_Pilot, who may elect to delete unwanted replies.
Oct 25, 2020, 02:15 PM
Ad eos qui nesciunt crepitus
Old_Pilot's Avatar
Thread OP
Gallery

70mm Jetstream.......


In homage to Rusty-Gunn, I modified his original design (the Jimi Jetstream) to accept a 70mm EDF !

This is my way of saying thank you for so many wonderful designs over the years..Best wishes to Rusty

Note, the Jimi Jetstream was the first foamie I ever built....started me down the flat jet road......

Spec's
30" WS 50% KFM-2 wing
70mm Powerfun 12 blade fan
3400 kv motor
80 Amp ESC
3300 mah 50C 4 cell
19 gram MG servos
Lemon 6 channel receiver with satellite
The nacelle is a 22 oz plastic stadium cup
Airframe is 3/16" Elmers board

Weather will have to get better before I maiden her
Last edited by Old_Pilot; Oct 25, 2020 at 02:23 PM.
Sign up now
to remove ads between posts
Oct 27, 2020, 09:37 AM
Registered User
Daren71's Avatar
That looks really nice! Good luck with the maiden.
Nov 02, 2020, 06:29 PM
tree scavenger
dude, thats really a sweet little machine! sweet n Clean,,
ive never heard of it,, is that carbon tow on the LE perimeter?
even the beercup looks Bling on this badgirl lol
ss
Nov 03, 2020, 06:38 AM
Ad eos qui nesciunt crepitus
Old_Pilot's Avatar
Thread OP

Leading Edge


I use faux CF tape from AutoZone, or O'Reillys ......cut into 2" wide strips
Latest blog entry: 40" Hawker Tempest Mk-1 Foamie


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Kyosho Jetstream 800 EP Restoration help Derka Racing Boats - Electric 19 Mar 29, 2016 05:41 AM
Discussion Thoughts on Kyosho Jetstream 600? ProfitOfDoom Racing Boats - Electric 2 Feb 08, 2016 10:03 PM